Sharp MX-C303, Быстрый старт

Страница: 23 / 64

BEFORE USING THE MACHINE
23
LOADING PAPER IN BYPASS TRAY
1
Open the bypass tray and the
extension tray.
2
Push the center of the pressure plate
down until it locks into place.
3
Load the paper with the print side
facing down.
Insert the paper along the bypass tray guides all the way into the
bypass tray until it stops slowly. Inserting the paper with excessive
force may cause the leading edge to fold back. Inserting the paper
too loosely may cause skewed feeding or misfeeds.
The paper must not exceed the maximum number of sheets
and must not be higher than the indicator line.
4
Set the bypass tray guides correctly to
the width of the paper.
Adjust the bypass tray guides so that they slightly contact
the loaded paper.
To add paper, press down the pressure plate until it locks, remove any paper remaining in the bypass tray, combine it
with the paper to be added, and place in the bypass tray again. If paper is added without removing the remaining paper,
a paper jam may result. A paper jam may also result if more than the specified number of sheets are added, or if the
paper stack exceeds the limit.