Sharp MX-B557F Скачать руководство пользователя страница 186

Страница: 186 / 218

Action

Yes

Step 5

Remove, and then reinstall the print driver.

Print the document.

Is the document printed?

The problem is

solved.

Contact your

dealer

The printer is not responding

Action

Yes

Step 1
Check if the power cord is connected to the electrical outlet.

CAUTION—POTENTIAL INJURY: To avoid the risk of fire or

electrical shock, connect the power cord to an appropriately

rated and properly grounded electrical outlet that is near the

product and easily accessible.

Is the printer responding?

The problem is

solved.

Go to step 2.

Step 2
Check if the electrical outlet is turned off by a switch or breaker.

Is the electrical outlet turned off by a switch or breaker?

Turn on the switch or

reset the breaker.

Go to step 3.

Step 3
Check if the printer is on.

Is the printer on?

Go to step 4.

Turn on the printer.

Step 4
Check if the printer is in Sleep or Hibernate mode.

Is the printer in Sleep or Hibernate mode?

Press the power

button to wake the

printer.

Go to step 5.

Step 5
Check if the cables connecting the printer and the computer are

inserted to the correct ports.

Are the cables inserted to the correct ports?

Go to step 6.

Insert the cables to

the correct ports.

Step 6
Install the correct print driver.

Is the printer responding?

The problem is

solved.

Go to step 7.

Troubleshooting

186

Содержание MX-B557F



























































































































































































































Результаты поиска

Содержание MX-B557F

Отзывы:

Бренды по названию

Популярные бренды

Sharp MX-B557F, Руководство пользователя

Результаты поиска

Содержание MX-B557F

Отзывы:

Бренды по названию

Популярные бренды