Sharp MX-B467P, Руководство пользователя

Страница: 9 / 132

1 Top 305 mm (12 in.)
2 Rear 100 mm (3.94 in.)
3 Right side 110 mm (4.33 in.)
4 Front 305 mm (12 in.)
Note: The minimum space needed in front of the printer is 75 mm (3 in.)
5 Left side 65 mm (2.56 in.)
Printer configurations
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, contact the place where you purchased the printer.
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
You can configure your printer by adding optional 250
‑
or 550
‑
sheet trays. For more information, see “Installing
optional trays” on page 118 .
1 Control panel
2 Standard bin
3 Controller board access cover
4 Standard 250
‑
sheet tray
5 Optional 250
‑
or 550
‑
sheet tray
6 Multipurpose feeder
Learning about the printer 9