manualshive.com logo in svg

Sharp MX-B350W, Руководство пользователя

MX-B350W - многофункциональное устройство от Sharp, комбинирующее печать, сканирование и копирование. Идеально подходит для небольших офисов и домашнего использования. Скачайте бесплатно Руководство пользователя на manualshive.com, чтобы настроить и использовать устройство максимально эффективно.

Поделиться
Скачать
background image

7-20

SYSTEM SETTINGS

►

SYSTEM SETTINGS

Sending Function

These settings are used to change the default settings 
(initially set at the factory) for the various fax 
transmission functions to settings that better meet your 
needs.
Select the [Sending Function] to configure the settings.

Orig. Size Enter

Set the size of originals scanned on the document glass. 
Normally 8-1/2" x 11" is set.

Set Res. Con.

This setting is used to adjust the resolution and the 
exposure level when scanning an original to be faxed. 
The initial setting is standard resolution and auto 
exposure mode.

Send Mode

This setting is used to select whether the default mode 
for sending faxes is memory transmission or direct 
transmission. 
The initial setting is "Memory TX".

Quick On Line TX

This setting is used to select whether or not quick on-line 
transmission (transmission while original pages are 
being scanned into memory) takes place when a 
memory transmission is performed.
If quick on-line transmission is disabled, transmission 
will not begin until all original pages have been scanned 
into memory.
Normally quick on-line transmission is enabled.
When this function is disabled, transmission will not 
begin until all pages of the document have been 
scanned. Note that this setting does not apply to manual 
transmission. (See 

Storing transmission jobs (memory 

transmission) (page 4-17)

.)

• Quick on-line is enabled and a checkmark appears in 

the checkbox.

• If this procedure is performed when quick on-line is 

enabled, the checkmark will be cleared and quick 
on-line disabled.

Print Station # In Rcvd Data

This setting lets you select the position (inside or outside 
the original image) of the date and sender's information 
that are printed at the top of each fax page you send. 
Normally outside the original image is selected. To have 
your name and number printed inside the original image, 
select "In Data".
For more detailed information on the position of each 
setting, see 

INCLUDING SENDER INFORMATION ON 

FAXES (OWN NUMBER SENDING) (page 4-46)

.

Address Review

You can specify whether a screen appears for 
confirmation of the destination when sending a fax.

Recall Setting (Busy)

This setting is used to set the number of recall attempts 
and the interval between recall attempts when a 
transmission is not successful due to the line being busy 
or other reason.
Normally the machine is set to make 2 recall attempts at 
intervals of 3 minutes.
If you do not wish to have recalling take place, set the 
number of attempts to "0".

Recall Set (Err)

When sending a fax, this setting is used to select 
whether or not the machine will automatically re-attempt 
the call if the transmission fails due to a line error. 
Normally the machine is set to make 1 recall attempt at 
intervals of 3 minutes.
If you do not wish to have recalling take place, set the 
number of attempts to "0".

Ring Timeout In Auto TX

When sending a fax by automatic transmission (see 

Storing transmission jobs (memory transmission) (page 
4-17)

), this setting lets you select the amount of time that 

the machine waits before breaking the connection when 
the other machine does not answer your machine's call. 
If the other machine does not respond within this set 
time, your machine will automatically break the 
connection.
Time selections are "30 sec.", "45 sec." and "60 sec.".
Normally "45 sec." is selected.

When the "Only apply to direct entry" checkbox is 
selected, the Address Review screen only appears 
when the fax number is entered with the numeric keys 
or the [REDIAL] key.

Even if this setting is enabled, the machine will not 
re-attempt the call when a fax is sent by manual 
transmission.

• If the recall interval is set to "0", the machine will 

immediately call again after the connection is 
broken due to the line error.

• Even if this setting is enabled, the machine will not 

re-attempt the call when a fax is sent by manual 
transmission.

Содержание MX-B350W



















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MX-B350W

Xerox 220 Getting Started preview
220
Бренд: Xerox Страницы: 48
Oce 3155 System Data preview
3155
Бренд: Oce Страницы: 4
IBM 3160 Introduction And Planning Manual preview
3160
Бренд: IBM Страницы: 102
Xerox B210DNI User Manual preview
B210DNI
Бренд: Xerox Страницы: 205
Xerox 4250 - WorkCentre - Copier Specifications preview
4250 - WorkCentre - Copier
Бренд: Xerox Страницы: 4
Oce VarioPrint 4110 User Manual preview
VarioPrint 4110
Бренд: Oce Страницы: 216
Lexmark C6160 User Manual preview
C6160
Бренд: Lexmark Страницы: 142
aqprox! appPOS80WIFI User Manual preview
appPOS80WIFI
Бренд: aqprox! Страницы: 52
SPRT SP-POS5810 User Manual preview
SP-POS5810
Бренд: SPRT Страницы: 12
Oce TDS450 Student Manual preview
TDS450
Бренд: Oce Страницы: 62
Canon PIXMA MX712 Guía De Configuración preview
PIXMA MX712
Бренд: Canon Страницы: 22
Canon PIXMA MX512 Getting Started Manual preview
PIXMA MX512
Бренд: Canon Страницы: 4
Canon PIXMA MP970 Setup Instructions preview
PIXMA MP970
Бренд: Canon Страницы: 2
Canon PIXMA MX432 Getting Started Manual preview
PIXMA MX432
Бренд: Canon Страницы: 4
Canon MP560 - PIXMA Color Inkjet Function Manual preview
MP560 - PIXMA Color Inkjet
Бренд: Canon Страницы: 12
Canon PIXMA MX512 Guía De Configuración preview
PIXMA MX512
Бренд: Canon Страницы: 21
Canon PIXMA MX350 Network Setup Manual preview
PIXMA MX350
Бренд: Canon Страницы: 34
Canon PIXMA MX522 Easy Setup preview
PIXMA MX522
Бренд: Canon Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды