manualshive.com logo in svg

Sharp MX-2314N, Руководство по эксплуатации

Sharp MX-2314N - Цифровое многофункциональное устройство с функцией копирования, печати, сканирования и факса. Для правильной установки прибора необходимо ознакомиться с Руководством по установке. Вы можете скачать это руководство бесплатно с {вебсайта}.

Поделиться
Скачать
background image

1-50

BEFORE USING THE MACHINE

Contents

EXTERNAL ACCOUNT MODULE (MX-AMX3)

The external account module is required to use a "external account application" on the machine.
An external account application can be used in "external authentication mode" or "external count mode". When external 
authentication mode is used, the login screen is retrieved from the application when the machine is started. When a job 
ends, a job notification screen is sent to the application to enable counts to be kept for each authenticated user.
When "external count mode" is used, the login screen is not displayed when the machine is started. Only a job result 
notification is sent to the application. User authentication by the external account application cannot be used, however, 
the external account application can be used in combination with the internal account function.

External account application setup

To enable an external account application in the Web pages of the machine, click [Application Settings] in the 
administrator menu frame, and then [External Applications Settings] and [External Accounting Application Settings]. 
Configure settings for the external account application in the screen that appears. The setting change will take effect 
after the machine is restarted. To restart the machine, see "

TURNING THE POWER ON AND OFF

" (page 1-15).

Operation in external account mode

The two modes for using an external account application operate as explained below.

External authentication mode

When the [Enable Authentication by External Server] checkbox is selected in "External Account Setting" of "Sharp OSA 
Settings" in the system settings (administrator), the machine enters external authentication mode. When the machine is 
powered on in external authentication mode, the machine accesses the external account application and displays the 
login screen. The login screen also appears when the [Call] key is touched to run a job in the job status complete screen. 
(The login screen does not appear if the user has already logged in by the normal method.)
The [JOB STATUS] key

 

(

)

 can be touched while the login screen appears to show the job status screen. To return to 

the previous state, press the mode select key.

2

Select the standard application.

If two or more standard applications have been stored in the 
Web pages, the screen to select the standard application will 
appear. Touch the standard application that you wish to use.
If only one standard application has been stored in the Web 
pages, connection to the standard application will begin.

3

The machine connects to the standard application.

The message "Connecting to the external application." appears while the machine communicates with the standard 
application.

The mode select key cannot be used during scanning.

• The user control function of the machine cannot be used in external authentication mode. 

However, "User Registration", "User Count Display", "User Count Reset", "User Information Print", and "The Number of 
User Name Displayed Setting" can be used.

• The mode select key cannot be used while the login screen appears.

App 00

App 07

App 06

App 05

App 04

App 03

App 02

App 01

Select External Application

Содержание MX-2314N





































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MX-2314N

NCR 7156 Operating And Troubleshooting Manual preview
7156
Бренд: NCR Страницы: 36
NCR 7156 Service Manual preview
7156
Бренд: NCR Страницы: 206
NCR 7156 Owner'S Manual preview
7156
Бренд: NCR Страницы: 138
Labau TM200 User Manual preview
TM200
Бренд: Labau Страницы: 19
Datecs PP-55 User Manual preview
PP-55
Бренд: Datecs Страницы: 73
Datamax H-Class Quick Start Manual preview
H-Class
Бренд: Datamax Страницы: 12
Datamax E-Class Mark II Maintenance Manual preview
E-Class Mark II
Бренд: Datamax Страницы: 40
Datamax E-class E-3202 Quick Reference Manual preview
E-class E-3202
Бренд: Datamax Страницы: 46
QMS 1060 User Manual preview
1060
Бренд: QMS Страницы: 311
SATO MN-4203 Specifications preview
MN-4203
Бренд: SATO Страницы: 2
Kyocera Mita FS-1050 Operation Manual preview
FS-1050
Бренд: Kyocera Mita Страницы: 209
Oce VarioLink 3622 User Manual preview
VarioLink 3622
Бренд: Oce Страницы: 209
ABLE Ap1400 Programmer'S Manual preview
Ap1400
Бренд: ABLE Страницы: 42
Oki B2540 Brochure & Specs preview
B2540
Бренд: Oki Страницы: 2
Oce im3530 Operator'S Manual preview
im3530
Бренд: Oce Страницы: 186
Konica Minolta bizhub PRO C65hc Additional Information preview
bizhub PRO C65hc
Бренд: Konica Minolta Страницы: 24
Konica Minolta bizhub pro 1200P User Manual preview
bizhub pro 1200P
Бренд: Konica Minolta Страницы: 333
Phoenix Contact THERMOMARK CARD User Manual preview
THERMOMARK CARD
Бренд: Phoenix Contact Страницы: 35

Бренды по названию

Популярные бренды

Загрузить еще бренды