manualshive.com logo in svg

Sharp MX-2314N, Руководство по эксплуатации

Sharp MX-2314N - Цифровое многофункциональное устройство с функцией копирования, печати, сканирования и факса. Для правильной установки прибора необходимо ознакомиться с Руководством по установке. Вы можете скачать это руководство бесплатно с {вебсайта}.

Поделиться
Скачать
background image

7-47

SYSTEM SETTINGS

Contents

User Control

User Control is used to configure settings for user authentication. Touch the [User Control] key to configure the settings.

User Authentication Setting

These settings enable or disable user authentication and specify the authentication method.
When user authentication is enabled, each user of the machine is registered. When a user logs in, settings for that user 
are applied. This function allows greater control of security and cost management than on previous machines.
In addition, even if the user information is not stored in the machine, it is possible to log in by directly entering user 
information stored on an LDAP server. In this case, the login user will be the factory-stored "User". For more information, 
see "

Factory-stored users

" (page 7-51).

User Authentication

When [User Authentication] is enabled, the login screen 
appears before an operation is begun in any mode 
except the job status screen*. You must log in as one of 
the stored users. (After logging in, you can move freely 
through the modes.)
* The login screen appears when a document filing file is 

used or when a broadcast transmission is reattempted 
from the job status screen.

Authentication Method Setting

This selects the authentication method. When using user 
authentication, be sure to configure this setting first. The 
items configured for users stored after the user 
authentication method is set vary depending on the 
selected authentication method.

Authenticate a User by Login Name and Password

Standard authentication method using a login name and 
password.

Authenticate a User by Login Name, Password and 
E-mail Address

In addition to a login name and password, this 
authentication method also requires the entry of an 
e-mail address.

Authenticate a User by User Number Only

This can be used as a simple authentication method 
when network authentication is not used.

Device Account Mode Setting

A specific user can be stored as an auto login user. 
When this setting is enabled, login can be performed 
automatically.
This function eliminates the bother of logging in but still 
allows the settings of the selected user (network 
settings, favourite operations, etc.) to be applied. 
You can also allow users other than the auto login user 
to temporarily log in and work using their own authority 
and settings. To allow other users to log in temporarily 
when [Device Account Mode] is enabled, select [Allow 
Login by Different User]. 
As an example, this enables uses such as 
"authentication for colour copying only".

• For the procedure for storing users, see "

User List

" (page 7-51).

• For more information on login procedures when user authentication is enabled, see "

USER AUTHENTICATION

" (page 

1-17) in "1. BEFORE USING THE MACHINE".

• The login screen will vary depending on the 

authentication method that is selected. For more 
information, see "

USER AUTHENTICATION

" (page 

1-17) in "1. BEFORE USING THE MACHINE".

• When "Authenticate a User by User Number Only" 

is selected for the authentication method, network 
authentication cannot be used.

• If auto login fails for some reason when auto login is 

enabled, or the login user does not have 
administrator rights, all system settings or the 
system settings (administrator) will lock. In this 
event, the administrator should touch the [Admin 
Password] key in the system settings screen and 
log in again.

• To log in as a user other than the auto login user 

when [Allow Login by Different User] is enabled, 
press the [LOGOUT] key (

) to cancel the auto 

user login state. The user authentication screen will 
appear to let you log in. After using the machine, 
press the [LOGOUT] key (

) to log out.

Содержание MX-2314N





































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MX-2314N

Oki 10i Read Me First preview
10i
Бренд: Oki Страницы: 16
Xerox D125 User Manual preview
D125
Бренд: Xerox Страницы: 310
Javelin J310 Quick Start preview
J310
Бренд: Javelin Страницы: 2
Canon imagePROGRAF GP-540 Setup Manual preview
imagePROGRAF GP-540
Бренд: Canon Страницы: 82
Xerox Phaser 7300DN Setup And Quick Reference Manual preview
Phaser 7300DN
Бренд: Xerox Страницы: 44
Oki LP441s Guía Del Usuario preview
LP441s
Бренд: Oki Страницы: 76
Xerox Phaser 6250DP Setup Manual preview
Phaser 6250DP
Бренд: Xerox Страницы: 2
Xerox Phaser 6280N Evaluator Manual preview
Phaser 6280N
Бренд: Xerox Страницы: 16
Oki B6500n Installation Manual preview
B6500n
Бренд: Oki Страницы: 1
Canon PIXMA MG5522 Manual preview
PIXMA MG5522
Бренд: Canon Страницы: 18
Canon MultiPASS MPC190 Setup Sheet preview
MultiPASS MPC190
Бренд: Canon Страницы: 8
Ricoh Lanier AP206 Setup Manual preview
Lanier AP206
Бренд: Ricoh Страницы: 406
Olivetti d-Copia 42 Operation Manual preview
d-Copia 42
Бренд: Olivetti Страницы: 24
ABLE Systems Ap1300 Quick Start Manual preview
Ap1300
Бренд: ABLE Systems Страницы: 4
Intellisystem ThermalTronix TT-1260S-UTCM User Manual preview
ThermalTronix TT-1260S-UTCM
Бренд: Intellisystem Страницы: 18
Pantum L2710 Series User Manual preview
L2710 Series
Бренд: Pantum Страницы: 164
Oki B700 Series Installation Instructions preview
B700 Series
Бренд: Oki Страницы: 4
Lexmark E120n Quick Start Manual preview
E120n
Бренд: Lexmark Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды