E-4
POWER SOURCE
Caution:
●
If the unit is not used for a long period of
time, remove the battery. (Even if the
power is turned off, the battery will drain
slowly but continuously.)
●
Do not use any car adaptor except for
the separately available AD-CA20X.
●
For information about the battery life, see
the battery item in the SPECIFICA-
TIONS on page 39.
●
This unit should only be used within the
range of 0
°
C - 40
°
C (32
°
F - 104
°
F).
●
Do not
use alkaline batteries other than
those specified (LR6, “AA” size).
1
3
2
■
Alkaline batteries power
●
Use two commercially available alkaline
batteries (LR6, “AA” size).
1
Open the battery cover.
●
Slide the battery cover as far as it will
go to the outside and then lift to open it.
If the battery cover is lifted without be-
ing slid all the way out, it may break.
2
Insert two alkaline batteries according
to the polarity marked on the bottom of
the unit.
●
Installing the batteries incorrectly may
cause the unit to malfunction.
3
Close the battery cover.
Precautions for alkaline battery use:
●
Replace all old batteries with new ones
at the same time.
●
Do not mix old and new batteries.
●
Remove the batteries if they are weak
or if the unit is not in use for long peri-
ods to prevent potential damage due to
battery leakage.
Caution:
Do not use nickel-cadmium battery, etc. in-
stead of alkaline batteries.
You can power this unit with commercially available alkaline batteries (LR6, “AA” size).
You can also power this unit with a rechargeable battery (AD-T20BT), AC adaptor (AD-
T20APH) or car adaptor (AD-CA20X) which are available separately. (See page 39.)
* MT15H FOR SEEG(E01-E19)
1999.05.07, 8:59
5
