Sharp MD-MS702, Руководство по эксплуатации

Страница: 30 / 44

5
When the letter you want is displayed,
press the
4
button.
●
To enter more letters in the name, repeat
steps 3 - 5.
6
When the disc name has been completely
entered, press the ENTER/F.PLAY/SYN-
CHRO button.
If an incorrect letter is entered:
To erase a character:
Press the
5
or
4
button to move the
cursor to the character you want to erase,
and then press the BASS/DEL button.
To correct a character:
Press the
5
or
4
button to move the
cursor to the character you want to correct,
and then enter the correct character.
●
Even after all the letters have been
entered, you can still go back and cor-
rect any mistakes.
When you want to enter lowercase
letters:
Enter capital letters as described in step 4
and press the DISPLAY button to change
them to the lowercase letters.
If you press this button again, the letters
will be changed back to capital letters.
To enter a space:
Press the + or – button to select “SPACE”.
Then, press the
4
button to enter a
space.
■
Track name
Up to 100 characters can be entered for
each name.
1
Play the track which you want to name,
and press the
06
button.
●
The unit will enter the pause mode.
2
Press the EDIT/A. MARK/TIME MARK
button to select “Tr NAME”.
●
When “Tr NAME” is selected while in
the stop mode, track numbers can be
changed using the
5
or
4
button.
3
Press the ENTER/F.PLAY/SYNCHRO
button.
●
The unit will enter the character input
mode.
●
To cancel the operation, press the
■
/:OFF button.
4
Perform steps 3 - 5 in the “Disc name”
section.
5
When the track name is completely
entered, press the ENTER/F.PLAY/
SYNCHRO button.
1
Track number that you
want to give a track name
2
A C D E V W X Y Z
1 3 4 5 8 9 2 0
/ . , & < > '
? ! " #
_ `
;
– : ( ) +
$
*
= @ %
B
.
.
Capital letters
Symbols
Type of
characters
Characters <symbols>
(They are selected using the + or – button.)
Returns to
Returns to
indicates a space.
5
Position where the next
letter will be entered
6
Lights
up
29
MD-MS702