MD-DR470H/MD-DR480H
– 18 –
: Continuous record menu
Continuous Record
* When the [STOP] button is pressed in specific condition, the "TEST MODE STOP" state is set.
* In the start address set state the start address changes as follows when the [DISP] button is pressed.
• Continuous record from the current pickup position
: Continuous record menu
: Start address setting
: Continuous record
# # # #: Address
: Continuous record
# # # #: Address
DISP
T R E C
A d 0 0 3 2
PLAY
A P # # # #
• Continuous record playback from any address
A d 0 0 3 2
0 0 3 2
H
(initial value)
0 3 C 0
H
0 7 0 0
H
0 8 A 0
H
A d 0 3 C 0
DISP
A d 0 7 0 0
DISP
DISP
DISP
A d 0 8 A 0
* In the start address setting state the start address change digit changes when the [REC] button is pressed.
* In the start address set state the value of selection digit changes in the range of 0h to Fh when
the [SKIP UP/DOWN] button is pressed.
* In the continuous record state and start address set state the record laser power changes in the
range of "0h to Fh" when the [VOLUME UP/DOWN] button is pressed. (Initial value 0DH)
A d 0 0 5 0
1st digit (initial value)
2nd digit
3rd digit
A d 0 0 5 0
A d 0 0 5 0
REC
REC
A d 0 9 5 0
0 9 5 0
H
PLAY
T R E C
A P # # # #
AUTO1 Practice finish ?
AUTO2 Practice finish ?
YES
YES
E r A D J
AUTO2 Practice
No error ?
A D J. N G
NO
NO
YES
NO
Enter the EEPROM setting mode, and press the SKIP UP button.
Change the MSL setting value from 00 to 08 by using CTRL_ (control setting menu).
(If the MSL remains in 00, no signal is recorded.)
REC
Содержание MD-DR470H
Страница 59: ...MD DR470H MD DR480H M E M O 8 ...