Changing Channels
You can select channels using
Channel Select
or
CH (
)/(
)
.
• This LCD TV set allows you to select up to 125 channels
(1 to 125). To select a channel, enter a 2- or 3-digit number.
■
Using Channel Select
When selecting the channel using
Channel Select
, complete
input of the channel number by holding down the button for
the last digit for a moment.
To select a 1- or 2-digit channel number (e.g., Channel 5):
Complete the following procedure within 4 seconds.
Press the
button.
Press the
button.
0 –
5
A
• When selecting a 1-digit channel number, do not fail to press the
button first.
To select a 3-digit channel number (e.g., Channel 115):
Complete the following procedure within 4 seconds.
Press the
button.
Press the
button.
1 – –
1 1 –
Press the
button.
1 1 5
A
• The 3-digit channel number can be selected only when the
receiving mode is set to CABLE in CH-SETTING.
Changing channels with CH (
)/(
) on the remote control
Air:
Press
CH (
)
and the channels change in the order shown below:
2
→
3
→
. . .
→
68
→
69
→
2
→
3
→
. . .
Press
CH (
)
and the channels change in the order shown below:
3
→
2
→
69
→
68
→
. . .
→
3
→
2
→
. . .
Cable: Press
CH (
)
and the channels change in the order shown below:
1
→
2
→
3
→
. . .
→
125
→
1
→
2
→
3
→
. . .
Press
CH (
)
and the channels change in the order shown below:
3
→
2
→
1
→
125
→
. . .
→
3
→
2
→
1
→
. . .
■
Using FLASHBACK
●
Press
FLASHBACK
to switch the currently tuned channel
to the previously tuned channel.
●
Press
FLASHBACK
again to switch back to the currently
tuned channel.
Sound Volume
■
To adjust the volume
●
Press
VOL (+)
to increase the sound volume.
The bar indicator shifts right.
VOLUME
5
0
●
Press
VOL (–)
to decrease the sound volume.
The bar indicator shifts left.
VOLUME
1
0
■
To mute the sound
●
Press
MUTE
to temporarily turn off the sound.
The MUTE mark
is displayed for 4 seconds.
●
Press
MUTE
or
VOL (+)/(–)
to turn the sound back to the
previous level.
The mute function is automatically turned off when any of
the following buttons are pressed:
POWER, MUTE,
VOL (+)/(–)
or
MTS
.
VOLUME
1
0
A
•
When
VOL (+)/(–)
is pressed in the Mute mode, the sound turns
on and the volume indicator is displayed.
•
The Mute function is canceled when
POWER
is pressed.
■
To select MTS (Multichannel TV Sound)
Press
MTS
to display the MTS screen.
Press
MTS
to select the MTS settings.
STEREO: stereo audio
SAP:
secondary audio program
MONO:
monophonic audio
STEREO
<
ON A I R
<
ON A I R
SAP
MONO
A
•
“ON AIR” appears when a STEREO or SAP broadcast is being
aired.
1
1
2
2
1
2
3
Basic Operation (Continued)
LC-20SH3U_E_P11-18.p65
05.6.8, 1:20 PM
13
