Sharp LC-60LE822E, Руководство по обслуживанию

Страница: 1 / 70

SERVICE MANUAL
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
SAFETY PRECAUTION
IMPORTANT SERVICE SAFETY
PRECAUTION.....................................................i
Precautions for using lead-free solder ...............ii
End of life disposal ............................................ iii
OUTLINE
MAJOR SERVICE PARTS ................................iv
CHAPTER 1. SPECIFICATIONS
[1] SPECIFICATIONS ......................................... 1-1
CHAPTER 2. OPERATION MANUAL
[1] Parts Name .................................................... 2-1
CHAPTER 3. DIMENSIONS
[1] DIMENSIONS ................................................ 3-1
CHAPTER 4. REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS ................... 4-1
[2] Caution
Cleaning Glass ................................. 4-6
[3] How to replace the Touch Sensor key PWB ......... 4-8
CHAPTER 5. TOUCH SENSOR UNIT POSITIONING
FIGURE
[1] TOUCH SENSOR UNIT POSITIONING
FIGURE .........................................................5-1
CHAPTER 6. ADJUSTMENT
[1] ADJUSTMENT PROCEDURE ......................6-1
CHAPTER 7. TROUBLESHOOTING TABLE
[1] TROUBLESHOOTING TABLE ......................7-1
[2] LED flashing specification at the time of the
error .............................................................7-14
CHAPTER 8. MAJOR IC INFORMATIONS
[1] MAJOR IC INFORMATIONS .........................8-1
CHAPTER 9. OVERALL WIRING/BLOCK DIAGRAM
[1] OVERALL WIRING DIAGRAM......................9-1
[2] SYSTEM BLOCK DIAGRAM.........................9-2
Parts Guide
CONTENTS
LC-60LE822E/LC-60LE822ERU
LCD COLOUR TELEVISION
LC-60LE822E
LC-60LE822ERU
MODELS
No. S90L460LE822E
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.