Sharp lc-32rd8, Руководство по обслуживанию

Страница: 1 / 118

SERVICE MANUAL
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
SAFETY PRECAUTION
IMPORTANT SERVICE SAFETY PRE-
CAUTION ............................................................i
PRECAUTIONS FOR USING LEAD-FREE
SOLDER ............................................................ii
CHAPTER 1. SPECIFICATIONS
[1] SPECIFICATIONS ......................................... 1-1
[2] OPERATION
MANUAL .................................. 1-2
[3] DIMENSIONS ................................................ 1-5
CHAPTER 2. REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS ................... 2-1
CHAPTER 3. ADJUSTMENT
[1] After replacement of any PWB and/or IC for
repair, note the following. ............................... 3-1
[2] SOFTWARE UPDATING................................ 3-1
[3] Entering and exiting the adjustment pro-
cess mode.................................................... 3-18
[4] Remote controller key operation and de-
scription of display in adjustment process
mode. ........................................................... 3-18
[5] Adjustment process mode menu.................. 3-19
[6] Special features............................................ 3-20
[7] Tuner adjustment procedure ........................ 3-21
[8] Common bias adjustment ............................ 3-21
[9] White
Balance Adjustment ........................... 3-22
[10] Adjusting procedure by use of [RS-232C] ......3-23
[11] Initialization to factory settings.....................3-24
[12] Lamp error detection ...................................3-24
[13] Public Mode (Hotel Mode) ...........................3-25
CHAPTER 4. TROUBLESHOOTING TABLE
[1] TROUBLESHOOTING TABLE ......................4-1
CHAPTER 5. BLOCK DIAGRAM/OVERALL WIRING
[1] BLOCK DIAGRAM.........................................5-1
[2] SYSTEM BLOCK DIAGRAM.........................5-3
[3] OVERALL WIRING DIAGRAM......................5-4
CHAPTER 6. PRINTED WIRING BOARD ASSEM-
BLIES
[1] MAIN Unit ......................................................6-1
[2] R/C, LED Unit ................................................6-5
[3] MINI AV Unit ..................................................6-6
[4] KEY ...............................................................6-7
CHAPTER 7. SCHEMATIC DIAGRAM
[1] DESCRIPTION OF SCHEMATIC DIA-
GRAM............................................................7-1
[2] SCHEMATIC DIAGRAM ................................7-2
Parts Guide
TopPage
CONTENTS
No. S78M3LC32RD8E
LCD COLOUR TELEVISION
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
MODELS
LC-32RD8E-BK/GY
LC-32RD8S-BK/GY
LC-32RD8RU-BK/GY
LC - 32RD8E/S/RU-BK/GY (1st Edition)