Sharp LC-32LE355M, Руководство по эксплуатации, Страница: 8 / 22

6
Part names
TV (Front)
POWER indicator
Light off Power off.
Lighted (Red) The TV is in standby mode.
Lighted (Green) The TV is on.
Remote control sensor
TV (Rear)
13 12 10 10 9 9
6
11
4 4
5 5
6 6 2 6
2 2 1 1
3 3
8
8
7
1
2
3
4
5
15
14
1 POWER (On/Off) button
2 MENU button
3 INPUT button
4 Channel up (
r
)/down (
s
) buttons
5 Volume up (
e
)/down (
f
) buttons
6 INPUT 1 (HDMI/ARC) / INPUT 2 (HDMI)* /
INPUT 3 (HDMI/MHL) terminals
7 RS-232C terminal
8 INPUT 4 terminals
9 AUDIO OUT terminals
10 INPUT 5 terminals
11 INPUT 6 terminal*
12 DIGITAL AUDIO OUTPUT terminal
13 Antenna input terminal
14 USB terminal
15 Headphone jack ( 3.5 mm)
• The speakers do not output volume when
headphones are plugged in.
* The INPUT 2 and INPUT 6 terminals can both use the same analogue audio input terminal. However, the proper item must be selected in the
“Audio select” menu. (See page 10.)
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The illustration used throughout this manual are based on LC-32LE355M.
Turning the TV on/off
Turning on
/
off the power
Standby mode
• To turn on the power
Press POWER on the TV. (After a few seconds, an image appears
with sound.)
• To turn off the power
Switch it off by pressing
POWER
on the TV.
• To standby mode
If the TV is switched on, you can switch it to standby by pressing
POWER on the remote control.
• Switching on from standby
From standby, press
POWER
on the remote control.
NOTE
• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.
LC32LE355M_EN_A5.indd 6 LC32LE355M_EN_A5.indd 6 6/24/2013 3:29:14 PM 6/24/2013 3:29:14 PM