Sharp LC-32LE350M, Руководство по обслуживанию, Страница: 8 / 70

LC-32LE350M
3 – 3
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from
being damaged.
1
Confi-rm the screws supplied with the TV.
VIDEO
R-AUDIO-L
R-AUDIO-L
R-AUDIO-L
COMPONENT/AV INPUT
VIDEO/Y
AUDIO OUT
ANT
INPUT 1
ANALOGUE RGB (PC)
INPUT 4
AUDIO
IN
(R/L)
Soft cushion
Screw driver
Screw
Stand base
guide pins
Guide pin holes
Table edge
Screws (
m
4)
(used in step 3)
2
Insert the stand base guide pins to the
stand holes on the rear of the TV. (
1
)
• Make sure the symbol on the stand base is
parallel with the triangle symbol located at
the back of the TV.
3
Insert and tighten the 4 screws into the 4 holes
on the rear of the stand base. (
2
)
NOTE
• To detach the stand, perform the steps in reverse order.
• The TV position setting is set to 7
backward after attaching
the stand.
• Do not remove the plastic wrap before attaching the stand
base to protect it from scratches.
• The bottom area of the set (curvy area) must be beyond the
table’s edge to prevent the TV from damage.