Sharp LC-24LE210EH Скачать руководство пользователя

Страница: 6 / 8

LC-24LE210EH

SERVICE ADJUSTMENTS

2. Entering and exiting the adjustment process mode.

Exclusive method for this Hotel mode.

1. Entering / exiting the adjustment process mode manually.

0. Connect a HDMI source through “HDMI 1” terminal (through “HDMI 2” does not work.) and switch it on.
1. Once the TV is on, unplug the AC power cord.
2. Press and hold “V+” and “

” keys, simultaneously, and then plug the AC power cord.

3. A password will be requested. Introduce “0027”.
4. “PUBLIC MODE” menu appears on the screen.
5. Press cursor

▼

▲

until selecting “HOTEL MODE”, then set it to OFF.

6. Press cursor

▼

until selecting “EXECUTE”, then press OK.

7. Switch OFF and ON the TV set.
8. Now the TV is in normal standard operation, all the features are available and it may be serviced without any

external signal device.

2. Once the TV has been serviced, activate again the Hotel mode by restoring the factory default

values.

1. Press the MENU key.
2. Press cursor

▼

▲

until selecting “OPTION” submenu.

3. Press cursor

▼

▲

until selecting “RESTORE FACTORY DEFAULT” and con

rm selecting “YES”.

4. Description of display

Figure 1: Main Service Adjustment Menu

←

Informative (Main microprocessor version).

←

Informative.

←

Informative (Remote Control/Keyboard…).

←

Informative (None/Lamp Error).

←

Press “OK” to go to INIT submenu.

←

Press “OK” to go to ADJUST submenu.

←

Press “OK” to go to ETC submenu.

←

Press “OK” to go to PUBLIC MODE submenu.

←

Press “OK” to go to SMARTLOADER submenu.

←

Press “OK” to go to ADC ADJUST submenu.

←

Press “OK” to go to GAMMA submenu.

←

Press “OK” to go to SYSTEM INFORMATION submenu.

←

SHARP FACTORY MENU

Main version

24LE210EHE SHARP v1.0 SEES v96 MSTAR CL322528

Bootloader version

BD_MST064E_C01A 2

Normal standby cause

Remote control

Error standby cause

None

INIT
ADJUST
ETC
PUBLIC MODE
SMARTLOADER
ADC ADJUST
GAMMA
SYSTEM INFORMATION

No. Description

Display speci

cation

(1)

Service Information

Current Software version and others.

(2)

Item name

Submenus to be checked or adjusted (by pressing “OK” button)

(3)

Factory init and Inch setting

Are shown on INIT submenu

(2)

(3)

(1)

Содержание LC-24LE210EH









Результаты поиска

Содержание LC-24LE210EH

Отзывы:

Похожие инструкции для LC-24LE210EH

Бренды по названию

Популярные бренды

Sharp LC-24LE210EH, Руководство по обслуживанию

Результаты поиска

Содержание LC-24LE210EH

Отзывы:

Похожие инструкции для LC-24LE210EH

Бренды по названию

Популярные бренды