E-49
IM-DR420H
ENGLISH
03/7/21 IM-DR420H_SEEG_E.fm
IM-DR420H TINSZ0964AWZZ
Ref
e
rences
-E
rr
o
r M
ess
a
g
es
-
Error Messages
A number or symbol appears in (*) position.
ERROR
MESSAGES
MEANING
BATT EMPTY
"
The battery has run down.
BLANK MD
"
Nothing is recorded.
(Replace the disc with a recorded disc.)
Can't COPY
"
You tried to record from a copy prohib-
ited MiniDisc.
(Record using the analogue cable.)
"
You tried to record signals other than
music (such as data).
Can't EDIT
"
A track cannot be edited.
(Change the stop position of the track and
then edit it.)
Can't LOCK
"
You tried to remove the MD whilst re-
cording or editing.
Can't PLAY
"
You tried to play back a track that can-
not be played with this equipment.
Can't READ (*)
"
The disc data cannot be read because
the disc is damaged.
(Reload the Minidisc or replace it with an-
other one.)
Can't REC
"
Recording cannot be performed cor-
rectly due to vibration or shock.
ERROR
MESSAGES
MEANING
Can'tSTAMP
"
Stamp function does not work.
(Check the number of tracks.)
Can'tWRITE
"
Cannot save the TOC information cor-
rectly to a MiniDisc.
DEFECT!
"
The disc is scratched.
(If the recorded sound is not right, retry re-
cording or replace the disc with a recordable
one.)
DISC FULL
"
The disc is out of recording space.
Er-MD (**)
"
The microprocessor has reported a sys-
tem fault and the unit is out of order.
(To have it repaired, go to the distributor
where you purchased the unit.)
HOLD
"
The unit is in the hold mode.
LOCKED
"
You removed a MiniDisc whilst recording
or editing.
(Turn off the power before removing the
MiniDisc.)
NO DISC
"
A disc has not been loaded.