Settings 141
To Set the Azimuth Pict Display
“Settings”
→
“Phone Settings” tab
→
“Motion
Control”
→
“Azimuth Pict Display”
1.
Select “On” or “Off”.
Setting the Sound Output
“Settings”
→
“Phone Settings” tab
→
“Switch
Ringtone Output”
1.
Select “Earphone Only” or “Ea Speaker”.
Change Menu
You can change the type of menu to display.
“Settings”
→
“Phone Settings” tab
→
“Change
Menu”
1.
Select “Standard Menu” or “Large Font Menu”.
Security Settings
You can set various locks on your phone such as PIN
Entry and Handset Lock.
“Settings”
→
“Phone Settings” tab
→
“Security
Settings”
Enabling/Disabling the PIN Code
If the PIN code is enabled, you are asked to enter the
PIN code each time the phone is switched on. Your PIN
code is registered on the SIM/USIM card and you
should have been made aware of the code when you
purchased the SIM/USIM card. Contact your service
provider for further details.
Select “On” for “PIN Entry” and enter your PIN code if
you wish to activate the PIN lock.
Note
•
If you enter the wrong PIN code three times, the SIM/
USIM card will lock. To remove the lock, contact
your service provider or SIM/USIM card vendor.
(M 9-10)
(M 9-12)
(M 9-13)