Sharp HEALSLO AX-1700R, Руководство по эксплуатации

Страница: 10 / 42

E – 8
Perform the Drain Water function at least once a day
after using water tank. It takes up to 8 minutes.
Drain Water function is very useful to prevent
scale build up and the use of stale water. It causes
evaporation of the internal steam system.
P R O C E D U R E
1
Make sure the water tank is
removed and press
START
.
2
Ensure nothing is in the oven.
Turn the Knob to select [ 22 ]
Drain Water.
After the oven has cooled, wipe oven cavity.
3
NOTE:
The water tank must be removed before starting this
procedure.
White or gray grains, also called scale, may form in the
water circuit inside the oven during steam generation,
which could cause the oven to malfunction.
When “DESCALE” is shown in the display, be sure to
carry out Descale function immediately. It takes about
1 hour.
P R O C E D U R E
1
Place a folded towel under the steam outlets as
shown in Figure 2.
2
5
When rinsing has ended, remove water tank
and empty.
Remove the towel.
Wipe oven cavity to dry. Then empty the drip
tray.
6
Pure citric acid, available at some drugstores,
is used for descaling. Open the lit of the water
tank. Fill the water tank with water over the 1
mark. Then dissolve 2 tablespoons of pure citric
acid as shown in Figure 1.
When the oven has stopped, wipe oven cavity,
then wring the towel and put it again as shown
in Figure 2. Remove water tank, empty, rinse
and refill with water over the 1 mark. Replace
the water tank.
Remove and empty the drip tray, then replace it
to the oven.
Press
START . Rinsing will start.
Figure 1
Figure 2
IMPORTANT INSTRUCTIONS
Descale Function
Drain Water Function
3
Press
START
.
4
Turn the Knob to select [ 24 ]
Descale.
1
2
Steam outlets
Towel
(AX-1700R).indb 8 2019/08/01 15:32:12