E-8
Gently remove dust from the back panel,
using a vacuum cleaner attachment or
similar tool.
BACK PANEL
(Pre-filter)
To maintain optimum performance of this air purifier, please clean the unit including the filter
periodically.
Be sure to disconnect the power cord from the wall outlet before performing any maintenance.
CARE AND MAINTENANCE
Back Panel
UNIT
NOTE How to clean hard to remove dirt
1. Add a small amount of kitchen detergent
to water and soak for about 10 minutes.
2. Rinse off the kitchen detergent with
clean water.
3. Completely dry the filter in a well-
ventilated area.
SENSOR
sensor filter
Back Panel
CAUTION
Do not apply excessive pressure, when
scrubbing the back panel.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth
dampened with warm water.
•
Do not use volatile fluids
Benzine, paint thinner, polishing powder, etc. , may damage the surface.
•
Do not use detergents
Detergent ingredients may damage the unit.
CAUTION
1. Remove the Back Panel.
2. Remove the Sensor filter.
3. If it is very dirty, wash it with water and dry it
thoroughly.
OM_FP-F40TA_TH-EN.indb 8
4/10/2558 BE 3:37 PM
