Sharp FO-730, Руководство по обслуживанию, Страница: 11 / 81

1 – 9
UX-310DE
FO-730DE/NX-530DE
6. When finished, press:
[5] Quick reference guide
INSTALLATION
1. Connect the handset as shown.
2. Plug the power cord into a grounded, 220-230 V outlet.
3. Plug one end of the telephone line into the TEL. LINE jack on the rear of the
fax, and the other end into your telephone wall jack.
CONNECTING AN ANSWERING MACHINE AND/OR EXTENSION TELEPHONE
Germany:
The TEL. SET socket is not available on the fax.
We recommend that you plug the answering machine line cable into the right
connector of the TAE wall outlet, a (e.g.: cordless) telephone into the middle con-
nector and fax line cord into the left connector.
Switzerland, Austria:
An extension phone cannot be used. An answering machine can be used if it is
connected to a wall socket (the TEL. SET socket is not available).
ENTERING YOUR NAME AND NUMBER
1. Press:
FUNKTION
3
Display shows: OWN NUMBER SET
2. Press:
3. Enter your fax number (max. of 20 digits) by pressing the number keys.
♦
If you make a mistake, press the SEARCH/R key to move the cursor
back to the mistake, then enter the correct number or letter.
4. Press:
START
5. Enter your name by pressing the appropriate number keys as shown below.
♦
To enter two letters in succession that require the same key, press the SPEAKER
key after entering the first letter.
SETTING THE DATE AND TIME
Press:
Display shows: DATE & TIME SET
Press the START key:
Enter two digits for the Day (01 through 31).
Enter two digits for the Month (01 through 12).
Enter four digits for the Year (Ex: 1999).
Enter two digits for the Hour (01 through 23).
Enter two digits for the Minute (00 through 59).
When finished, press:
STORING AND CLEARING NUMBERS FOR AUTOMATIC DIALING
1. Press:
Display shows: FAX/TEL # MODE
2. Press 1 to store a number or 2 to clear a number.
3. Enter a 2-digit Speed Dial number (from 01 to 05 for Rapid Key Dialing, or 06
to 45 for Speed Dialing) (FO-730/NX-530 from 01 to 08 for Rapid Key Dialing,
or 09 to 88 for Speed Dialing). (If you are clearing a number, go to Step 7.)
4. Enter the full telephone/fax number.
5. Press:
6. Enter the name of the location by pressing number keys (max. of 20 charac-
ters). (Refer to the letter entry table in ENTERING YOUR NAME AND
NUMBER.)
7. Press:
SENDING DOCUMENTS
Place your document (up to 10 pages)
face down in the document feeder.
START
START
START
STOP
FUNKTION
3
START
START
STOP
A =
B =
C =
D =
E =
F =
G =
H =
I =
J =
K =
L =
M =
N =
O =
P =
Q =
R =
S =
T =
U =
V =
W =
X =
Y =
Z =
SPACE =
KURZWAHL
WAHLWDH.
ALPHAWAHL
LAUTSPR.
ABC
DEF
JKL MNO GHI
TUV WXYZ PQRS
SYMBOLE
R
Deletes high-
lighted letter
Upper/lower
case shift key
Moves cursor
to the left
Moves cursor
to the right
Press either key one or more times to select
and enter a symbol.
START
STOP
FUNKTION
3
TEL.
SET
TEL.
LINE
1
3
2
N F N
Normal Dialing
1. Lift the handset or press
2. Dial the fax number.
3. Wait for the reception tone (if a person answers, ask them to press their Start
key).
4. Press:
Rapid Key Dialing
Press the appropriate Rapid Key. Transmission will begin automatically.
Speed Dialing
1. Press:
2. Enter 2-digit Speed Dial number.
3. Press:
RECEIVING DOCUMENTS
Press:
FAX mode: The fax automatically answers on four rings and receives the incoming
document.
TEL mode:
TEL/FAX mode: This mode is convenient for receiving both faxes and voice calls.
When a call comes in, the fax will detect whether it is a voice call (including manu-
ally dialed fax transmissions),or an automatically dialed fax.
A.M. mode: Select this mode when an answering machine is connected to the fax
and the answering machine is turned on.
LAUTSPR.
START
KURZWAHL
START
FAX TEL
ANRUFB.
FAX TEL
ANRUFB.
14 FEB 10:30
14 FEB 10:30
TEL/FAX
TEL/FAX
FAX TEL
ANRUFB.
14 FEB 10:30
TEL/FAX
FAX
TEL
ANRUFB.
14 FEB 10:30
TEL/FAX
EMPFAMGSART
Fax
tone
RECEIVING
START