Sharp FO-5700, Руководство по обслуживанию, Страница: 6 / 140

FO-5700U
2 – 2
[2] Diagnostics and service soft switches
1. Operating procedure
Two kinds of diagnoses are supported.
1-1. Fax diagnosis
This diagnosis is concerned with the main body of fax which is used
for production and service support.
Entering the diagnostic mode
1-2. Print diagnosis
This diagnosis is concerned with the print which is used for
production and service support.
Entering the diagnostic mode
Memory clear when power is turned on
Pressing the START and STOP keys, turn on the main power, and the
following message will be displayed.
Here, when 1: YES is selected, the memory will be cleared to be ready
for operation.
If 2: NO is selected, it will continue ready for operation as it is.
Press , and the following
display will appear.
FUNC
9 8 6
PCU ROM Ver.:
(Diag
•
specifications)
FUNC
9 8 6
START 01 AREA PRINT MODE
START 02 CHECK PATTERN 1
START 03
CHECK PATTERN 2
START 04
CHECK PATTERN 3
START 05
PAPER FEED AGING
START 06
BIAS ADJUST MODE
START 07
LIFE SET MODE
START
START
08
LIFE ALL CLEAR
START
09
LIFE ENTRY MODE
START
START
Then press the key. Select the desired item with the
key and the key or select with the rapid key.
Enter the mode with the key.
START 10
TOP ADJUST MODE
START 11 LIFE CLEAR MODE
PCU ROM Ver.:
MEMORY CLEAR
EXECUTE ? 1 = YES , 2 = NO
FUNC 9 8 7
START 01 SOFT SWITCH MODE
START 02 PRINT AREA
START 03 ROM & RAM CHECK
START 04 AUTO FEEDER MODE
START 05 AGING MODE
START 06 PANEL CHECK MODE
START 07 OPTICAL ADJUST MODE
START 08 PRODUCT CHECK
START
09
SIGNAL SEND MODE
START 10 COMM. CHECK MODE
START 11 MEMORY CLEAR
START
12
FLASH MEMORY
START 13 ALL FAX/TEL. ENTRY MODE
START
START 14
15 CONF. PASSCODE
START 16 PRINT HOLD CODE
START 17
ROM: FAB0
START
DEPT. PASSCODE
FUNC 9 8 7
Press , and the following
display will appear.
ROM: FAB0
START Then press the
key. Select the desired item with the
key
and the key or select with the rapid key.
Enter the mode with the START key.
(Diag
•
specifications)
FAB0
MEMORY SET MODE
START 18 STAMP AGING
START 19 DIAL TEST MODE
START
START
START
20
21
22
COPY DIAG MODE
SIGNAL SEND MODE2
JBIG TEST MODE