Sharp FO-2950M - B/W Laser - All-in-One Скачать руководство пользователя страница 144 | Manualshive

Страница: 144 / 232

Sharp FO-2950M - B/W Laser - All-in-One Скачать руководство пользователя страница 144

EDITING AND HANDLING OF IMAGE FILES

3-6

Any document created in or imported to the Multifunction Desktop, and any folder
that you have created can be renamed using the Rename... command.

Renaming Documents

There are two ways to rename a document. In Thumbnail View mode, all you need do is
click on the document you wish to rename to select it, and then click on the name area.
Then just enter the new name (up to 78 characters). You can also use the Rename...
command. Select the document in List View or Thumbnail View mode, and then choose
Rename... from the File menu, or right-click on the document and select Rename...
from the pop-up menu that appears.

Enter the new name in the Document Name field of the Rename Document dialog box,
and then click on OK to save the new name.

Renaming Documents and Folders in the Desktop

fo-3.p65

1/28/00, 1:45 PM

6

manuals4you.com

manuals4you.com

«
...
142
143
144
145
146
...
»

Содержание FO-2950M - B/W Laser - All-in-One









































































































































































































































Отзывы:

Нет отзывов