manualshive.com logo in svg

Sharp FO-2950M - B/W Laser - All-in-One, Руководство по обслуживанию

Поделиться
Скачать
Sharp FO-2950M - B/W Laser - All-in-One Скачать руководство пользователя страница 131

INTRODUCTION

1-5

Find:

Click on this button to find a document.

List View:
Clicking on this button will cause all documents in the Multifunction Desktop
to be displayed as a list.

Thumbnail View:
Clicking on this button will cause all documents in the Multifunction Desktop
to be displayed side-by-side as “thumbnail” images.

Page View:

Select a document and then click on this button to view it as a full page.

Show Image Toolbox:
Clicking on this button when in Page View will either display or hide the
Image Toolbox.

Stack:
Clicking on this button will cause any selected documents in the
Multifunction Desktop to be stacked on top of each other.

Unstack:
Click on this button to unstack any selected document stack in the
Multifunction Desktop.

Unstack top page:
Click on this button to unstack the top page only from any selected
document stack in the Multifunction Desktop.

MFP Control Panel:

Click on this button to invoke the Laser Multifunction Control Panel.

Annotation Properties:
Click on this button to set and change properties for annotating documents..

Zoom In:

Click on this button in Page View to increase the magnification for viewing
a document.

Zoom Out:

Click on this button in Page View to decrease the magnification for viewing
a document.

Fit to Window:
Click on this button in Page View to fit the entire document within the
window.

intro.p65

12/15/99, 6:14 PM

5

Содержание FO-2950M - B/W Laser - All-in-One









































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды