eCopy ShareScan OP Installation and Setup Guide
|
29
Creating a profile that uses a network folder (SMB)
If you are using a shared network folder for storage of scanned image files, you specify the path to
the target folder in a profile. You use the Sharp Network Scanner Tool to create the profile. The
user selects the profile at the device.
To create a profile:
1
Run the Network Scanner Tool (
Start > Programs > Sharpdesk > Network Scanner Tool
).
2
On the
Profiles
tab, click
New
.
3
In the
Properties for Profile
dialog box, specify the profile information, including the profile
name and descriptive information, such as:
Scan to shared folder for eCopy
.
4
Select the
Move File to Folder
check box and then click
Details
. Select the target folder and
then click
OK
.
5
Click
OK
to return to the main Network Scanner Tool screen.
6
Click
Apply
to save the new profile on the devices specified on the Scanners tab, and then click
Close
.
7
Click
OK
to quit the program.
