background image

1

DV-SL80/DV-SL80X

S45S9DV-SL80/

SERVICE MANUAL

Page

SPECIFICATIONS ............................................................................................................................. 1-1-1
LASER BEAM SAFETY PRECAUTIONS .......................................................................................... 1-2-1
IMPORTANT SAFEGUARDS AND PRECAUTIONS ......................................................................... 1-3-1
STANDARD NOTES FOR SERVICING ............................................................................................. 1-4-1
OPERATING CONTROLS AND FUNCTIONS .................................................................................. 1-5-1
CABINET DISASSEMBLY INSTRUCTIONS ..................................................................................... 1-6-1
FIRMWARE RENEWAL MODE ......................................................................................................... 1-7-1
TROUBLESHOOTING ....................................................................................................................... 1-8-1
BLOCK DIAGRAMS ........................................................................................................................... 1-9-1
SCHEMATIC DIAGRAMS/ CBA’S AND TEST POINTS .................................................................. 1-10-1
WAVEFORMS .................................................................................................................................. 1-11-1
WIRING DIAGRAM .......................................................................................................................... 1-12-1
SYSTEM CONTROL TIMING CHARTS .......................................................................................... 1-13-1
IC PIN FUNCTION DESCRIPTIONS ............................................................................................... 1-14-1
LEAD IDENTIFICATIONS ................................................................................................................ 1-15-1
EXPLODED VIEWS ......................................................................................................................... 1-16-1
MECHANICAL PARTS LIST ............................................................................................................ 1-17-1
ELECTRICAL PARTS LIST ............................................................................................................. 1-18-1

 CONTENTS

In the interests of user-safety (Required by safety regula-
tions in some countries) the set should be restored to its
original condition and only parts identical to those specified
be used.

MODELS

DV-SL80
DV-SL80X

SERVICE MANUAL

DVD VIDEO PLAYER

MODELS     DV-SL80/DV-SL80X

DVD VIDEO PLAYER

This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

SHARP CORPORATION

OPERATE

3

4

NTSC/PAL

---DV-SL80

---DV-SL80X

Содержание DV-SL80



























































Отзывы: