E – 7
Before cooking
1. Make sure the water tank is
fi
lled with room temperature water suitable for drinking (
fi
ltered) and is installed.
(See page E-6.)
2. Make sure the empty drip tray is installed. (See page E-6.)
3. Place food in the oven unless preheating is needed. (Refer to each chart to check if preheating is required in
automatic operations.)
After Cooking
1. After the oven has cooled, remove and empty the water tank, wipe oven cavity. Wait a few minutes, then
empty the drip tray.
2. Perform the Drain Water function at least once a day after using SuperSteam or Pure Steam mode.
3. Check that water is not dripping down before removing the drip tray, as a small amount of water drains into
the drip tray when the water tank is removed.
Oven Door Opening
You can stop the door with the upper part of the oven open to
exhaust steam, to cool or dry the oven cavity temporarily after
cooking. (See Figure 1)
WARNING:
Do not open the oven with your face close to the oven.
Steam from the oven may cause burns.
NOTE:
Avoid opening and closing the door during cooking as the
oven cavity temperature drops suddenly, which may affect the result.
Figure 1
SuperSteam & Pure Steam in Automatic and Manual Cooking
IMPORTANT INSTRUCTIONS
AX1600 En,P01-20 7
AX1600 En,P01-20 7
15/08/06 16:51
15/08/06 16:51
