Sharp AR-800 imager, Руководство по обслуживанию

Страница: 23 / 25

Clean at Lubricate at Replace Check
Category Item to check
440,000 copies 440,000 copies x 1,000 while on
Transfer 89-4. Transfer belt separation
A L
belt auxiliary roller bearing and GCB
90. ADU pick-up roller
A
91. ADU feed roller A
92. ADU separation belt
A
93. Transport rollers 1 to 4
A
ADU 94. ADU aligning roller
A
95. GCB bush and plastic bush
L
96. Drive gear tooth faces
W
97. Exit/ADU switching gate and Main
A
unit eixt section/ADU relay roller
48. PFP pick-up roller 110
49. PFP feed roller 110
50. PFP separation roller
AV
110
51. PFP aligning roller A
PFP 52. Paper guide
53. Tray drive worm wheel and
W
gear (tooth faces)
54. PFP drive gear (tooth faces)
W
55. GCB bush and plastic bush L
98. ADF pick-up roller 440
99. ADF feed roller 440
100. ADF separation pad 440
101. Transport belt 440
102. ADF aligning roller
A
ADF 103. ADF reversal roller
A
104. ADF empty sensor
105. ADF aligning sensor
106. ADF size sensor
107. Exit sensor
108. ADF timing sensor
109. Transport belt cleaning brush
56. LCF pick-up roller 440
57. LCF feed roller 440
58. LCF separation roller
AV
440
59. Manual pick-up roller 110
60. Manual feed roller 110
61. Manual separation roller
AV
110
LCF
62. Paper guide
63. Paper feed system drive gears
W
64. GCB bush and plastic bush
L
65. Gear
W
66. Worm and worm wheel
W
67. Worm shaft
W
68. Wire pulley shaft
W
Note: When lubricating, do not allow oil to come in contact the rollers, belts and belt pulleys.
MAINTENANCE