manualshive.com logo in svg

Sharp AR-317 Operation, Руководство оператора ключевого устройства

Поделиться
Скачать
Sharp AR-317 Operation Скачать руководство пользователя страница 261

7

WEB PAGE IN THE MACHINE

85

C O N T E N T S

E-mail status and e-mail alert settings

(part 2)

Status message setup

Use the status message function to send the current counter information, such as copy count, print count, and total output count, on 
a basis of the specified schedule. The destinations can be set for administrators and dealers respectively.

To set up the status message, follow these steps:

1

In the link menu, click [Status Message].

The "Status Message Setup" screen will appear.

2

Enter the required information, including the 
destination addresses and time schedule.

For more information, click [Help] in the menu frame.

3

Click [Submit] to store the entered information.

When the E-mail Status settings are completed, printer count 
information will be sent periodically by e-mail to the specified 
e-mail addresses.

If you quit the browser before clicking [Submit], the 
settings will be canceled. To send printer information 
immediately to the specified e-mail addresses, click 
[Send Now].

Note

Содержание AR-317 Operation















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды