58
Other useful features
How to operate USB recording
You can enjoy D-TV recording or playback by connecting a
commercially available USB HDD to the TV.
CAUTION
• Do not unplug the AC cord or turn off the MAIN POWER
switch during USB recording timer setting or USB recording.
• When the AC cord is unplugged and the MAIN POWER
switch is turned off:
−
The USB recording timer setting is cancelled.
• USB recording may be automatically stopped when signal
reception is poor.
• Only this TV can playback the programme recorded on the
USB HDD connected to this TV. The programmes cannot
playback on other TV or PC.
SHARP Corporation bears no responsibility regarding
compensation for content when recording does not
take place, loss of recorded data or other direct or
indirect damages related to these matters. Please be
forewarned.
E
Buttons for USB recording operation
MPX
MPX
Remote control unit
Control panel
Buttons
Description
• Displays the list of the programmes
recorded by USB recording.
REC
E
Start recording the programme you are
watching.
• You cannot playback the recorded
programme until approximately three
seconds after pressing
REC
E
to start
recording.
REC STOP
H
Stop recording.
I
Playback the recorded programme.
H
Stop the programme in playback and go
back to the real time broadcast (live).
F
Pause the programme in playback (USB
recording continues).
• This function is released in 15 minutes.
S
Reverse (each time you press this button,
the reverse speed changes in three levels).
J
Fast forward (each time you press this
button, the fast forward speed changes in
three levels).
K
Jump backward to the previous chapter
point*.
L
Jump forward to the next chapter point*.
a
Playback will resume after jumping
backward by the time interval you set in
“Jump time setting” (Page 60).
b
Playback will resume after jumping forward
by the time interval you set in “Jump time
setting” (Page 60).
* Chapter points are fixed at 10 minute increments.
NOTE
• Refer to
Regarding “Select recording device”
(Page 31),
when the buttons for USB recording do not work.
• Instead of pressing buttons on the remote control unit, most
of the operations shown to the left are also available on the
screen with the control panel. You can call up this control
panel by pressing
CONTROL
on the remote control unit or
select “Control (USB-REC)” from “HOME” > “TV Menu” >
“Setup” > “Option” > “Option for view”.
• USB recording stops if no operation detected for three hours.
• When recording operations are not stopped manually,
recording will automatically stop after six hours.
• To release USB recording, press
REC STOP
H
, change the
D-TV channel or change “INPUT”.
• Some functions do not work during USB recording.
• USB recording does not start automatically, but starts only
when
REC
E
is pressed or when a USB recording timer
setting is started.
• The PIN is required when you use the buttons such as
S
,
J
,
K
,
L
,
a
,
b
, if you set the PIN and any
options for “Parental rating” except “None” are selected.
• Do not disconnect the USB-HDD used for USB recording
during USB recording operation.
LC-6070UD1H_EN_book.indb 58
LC-6070UD1H_EN_book.indb 58
1/2/2014 8:57:23 AM
1/2/2014 8:57:23 AM
