Sharp Aquos LC-60LE751K, Руководство по эксплуатации

Страница: 7 / 64

Inserting the stand

Insert the stand into the openings on the bottom
of the TV (Hold the stand so it will not drop from the
edge of the base area).

Insert and tighten the four screws into the four
holes on the rear of the TV.
NOTE
•
To detach the stand unit, perform the above steps in reverse order.
Remote control unit
(
g
1)
• Operation manual (This publication)
• “AAA” size battery (
g
2)
Preparation
Supplied accessories
Attaching the stand unit
• Before attaching (or detaching) the stand, unplug the AC cord.
• Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it
from being damaged
.
CAUTION
• Attach the stand in the correct direction.
•
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Optional accessory
The listed optional accessories are available for this
LCD colour TV. Please purchase them at your nearest
shop.
• Additional optional accessories may be available in the
near future. When purchasing, please read the newest
catalogue for compatibility and check the availability.
• Stand unit (x1)
• This TV should be fixed on a wall only with the wall fix bracket available from SHARP (above table). The use of other
wall fix brackets may result in an unstable installation and may cause serious injuries.
• Fixing the LCD colour TV requires special skills and should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper fixing or
fixing that results in accident or injury.
• You can ask qualified service personnel about using an optional bracket to fix the TV on a wall.
• To use this TV fixed on a wall, first remove the adhesive tape at the two locations on the rear of the TV, and then use the screws
supplied with the wall fix bracket to secure the bracket to the rear of the TV.
• When you fix the TV on a wall, you should attach the supporting post.
Fixing the TV on a wall
• Cable tie (x1)
5
• WiFi adapter (x1)
No. Part name Part number
1 Wall mount bracket AN-52AG4
2 3D glasses AN-3DG20-B
Soft cushion