18
ENGLISH
•
Digital Audio Delay:
Adjust the digital audio output delay time to sync sound from an external speaker with the
images on the TV.
•
Lip Sync:
Synchronize the displayed image with the audio output.
•
Balance:
Emphasizes sound from the left or right speaker.
Sound Mode Settings:
Customize selected Sound Mode.
•
Bass Boost:
Bass Boost uses DTS TruBass
TM
to enhance the perception of bass frequencies to provide deep,
rich bass response from the TV's internal speakers.
•
Surround Sound:
Surround sound uses DTS TruSurround
TM
to deliver an immersive surround sound experience
from the TV's internal speakers.
•
Dialog Clarity:
Dialog Clarity uses DTS Dialog Clarity
TM
to boost the frequency range of the human voice so dialog
is clearly understood and heard above audio or surround effects.
•
Equalizer:
Adjust low to high pitch sounds.
•
Wall Mount setup:
Improves sound for wall-mount position.
Headphone:
Customize headphone audio.
•
Headphone Mode:
Disable the TV speaker when you are using a sound bar, ARC or any other external audio
amplifiers.
•
Headphone Volume:
Change the way audio is sent through the type of device that's connected to your TV Audio
Out port.
Advanced Audio Settings:
Tune the audio settings and quality of the TV.
•
Auto Volume Control:
Activate to prevent the volume from changing when you switch TV channels.
•
Preferred Audio Language:
Set the audio language based on your preference.(The preferred language must be
supported by the broadcaster.)
Reset Audio Settings:
Reset all of the Audio settings in current audio mode to the factory default values.
Network Menu
Network Configuration:
Configure network settings to connect to
an available network.
When the Connection Type is
Wired LAN
, means you choose a
wired network connection to access the Internet.
•
IP Settings:
Most devices obtain an IP address automatically.
Set an IP address manually if you do not have a router, or if your
router does not assign IP addresses for you.
When the Connection Type is
Wireless
, means you choose a
wireless network connection to access the Internet.
•
Refresh:
Refresh wireless network.
•
Add:
You can add wireless network.
•
Advanced Settings:
Configure the advanced wireless network settings for the TV.
Connection Test:
Tests the status of your network connection.
Network Information:
View information about your network connection.
Bluetooth:
Connects to external devices via Bluetooth.
NOTE
• Bluetooth function varies by model.
Network Information
Network Configuration:
Connected
Connection Test
Network
Configure network settings to
connect on an available network.
Bluetooth
