Sharp AQUOS LC-40LE812E Скачать руководство пользователя страница 30

Страница: 30 / 60

LC-40/46LE812E, LC-40/46LX812E, LC-40/46/52LE822E, LC-40/46LU822E (1st Edition)

4 – 1

LC-40LE812E

Service Manual

CHAPTER 4.

TROUBLESHOOTING TABLE

[1] TROUBLESHOOTING TABLE

No sound (during the reception of TV (DIGITAL) broadcasting)

Does not the sound go out though the picture has come out when DTV is received?

Is IF signal output to pins (10, 11) of TU1101?

Check the tuner and its peripheral circuits.
Replace as required.

YES

Is IF signal sent to pins (14, 15) of IC1102 (Multiplexer)?

Check the line between TU1101 and IC1102.

YES

Are pins (9, 10, 11) of IC1102 at H/L?

Is IF signal sent to pins (AA29/D__IF_P, AB29/D__IF_N) of
IC3302 (Digital AV decode & Main CPU)?

YES

Refer to “No sound output in all modes.”

Is IF signal sent to pins (41/INM, 42/INP) of IC1106?

Check the line between IC1102 and IC1106.

YES

Is signal output to pins (17/CTS_CK_60MHz, 18/CTS_SY, 19/
CTS_VA, 21/CTS_D0) of IC1106?

Check IC1106 and its peripheral circuits.

YES

Is signal sent to pins (2, 3/CS_TS_CK, 5, 6/CS_TS_SY, 10, 11/
CS_TS_VA, 14/CS_TS_D7) of IC4409 (TS SW)?

Check the line between IC1106 and IC4405.

YES

Is pins (2) of IC4409 at H?

Check the line between IC4409 and 21pins of IC4405.

YES

Is signal sent to pins (11/TS_DATA1, 12/TS_DATA2, 13/
TS_DATA3, 14/TS_DATA4) of IC4405?

Check the line between IC1106 and IC4405.

YES

Is signal output to pins (122/TS_VALIDO, 123/TS_CLKO, 124/
TS_DATAO, 124/TS_SYNCO) of IC4405?

Check IC4405 and its peripheral circuits.

YES

Is signal sent to pins (A30/TS_CPUIN_VAL, B30/
TS_CPUIN_CLK, C30/TS_CPUIN_SYNC, C29/TS_CPUIN_D0)
of IC3302 (Digital AV decode & Main CPU)?

Check the line between IC4405 and IC3302.

YES

Refer to “No sound output in all modes.”

Содержание AQUOS LC-40LE812E





























































Результаты поиска

Содержание AQUOS LC-40LE812E

Отзывы:

Sharp AQUOS LC-40LE812E, Руководство по обслуживанию, Страница: 30 / 60

Результаты поиска

Содержание AQUOS LC-40LE812E

Отзывы: