On
Off
Auto power on
AQUOS LINK control
Selecting recorder
Selecting channel key
Using genre info.
Setting auto power on by AQUOS LINK
52
Repeat steps 1 to 3 in
AQUOS LINK control
.
1
Press
a
/
b
to select “Selecting recorder”, and
then press
ENTER
.
2
Select the recorder, and then press
ENTER
.
3
Selecting recorder
Here, you can select a recorder for the recording from
several connected recorders.
AQUOS LINK
Press
MENU
to exit.
4
AQUOS LINK control
Auto power on
Selecting recorder
Selecting channel key
Using genre info.
Input Location
INPUT1
INPUT2
[1. 0. 0. 0]
[2. 0. 0. 0]
Selecting recorder for recording
by [REC] button
NOTE
• If you have connected the AQUOS AUDIO speaker system
between the TV and an AQUOS Recorder, the external
source
’
s indication changes (e.g. from “INPUT 1” to
“INPUT 1 (Sub)”).
Auto power on
Selecting recorder
Selecting channel key
Using genre info.
Input Location
INPUT1
INPUT1 (Sub)
INPUT2
[1. 0. 0. 0]
[1. 1. 0. 0]
[2. 0. 0. 0]
Selecting recorder for recording
by [REC] button
AQUOS LINK control
Repeat steps 1 to 3 in
AQUOS LINK control
.
1
Press
a
/
b
to select “Using genre info.”, and
then press
ENTER
.
2
Press
c
/
d
to select “On”, and then press
ENTER
.
3
Using genre info.
This function allows you to automatically switch to
the appropriate sound mode depending on the genre
information included in the digital broadcast.
Operating an AQUOS LINK device
AQUOS LINK allows you to operate the HDMI-
connected device with a single remote control unit.
Press
PLAY
I
to start playback of a title.
• See page 53, section “
Playback of titles using
AQUOS LINK
” if you want to start playback using
the list of the titles of the AQUOS BD Player/
AQUOS Recorder.
2
Press
FWD
J
to fast forward.
Press
REV
G
to reverse.
Press
STOP
H
to stop.
Press
POWER
to turn the HDMI-connected
device on/off.
3
Repeat steps 1 to 3 in
AQUOS LINK control
.
1
Auto power on
If this is activated, the One Touch Play function is enabled.
While the TV is in standby mode, it automatically turns on
and plays back the image from the HDMI source.
Press
a
/
b
to select “Auto power on”, and
then press
ENTER
.
2
Press
c
/
d
to select “On”, and then press
ENTER
.
3
Press
MENU
to exit.
4
NOTE
• The factory default for this item is “Off”.
1
Open the remote control unit’s fl ip cover.
Repeat steps 1 to 3 in
AQUOS LINK control
.
1
Selecting channel key
This function allows you to select the channel of the
connected HDMI device using the TV’s remote control
unit.
Press
a
/
b
to select “Selecting channel key”,
and then press
ENTER
.
2
Press
c
/
d
to select “On”, and then press
ENTER
.
3
Press
a
/
b
to select the input source of the
connected HDMI device you want to control
using the TV’s remote control unit, and then
press
ENTER
.
4
Auto power on
Selecting recorder
Selecting channel key
Using genre info.
INPUT1
On
On
On
Off
Off
Off
INPUT2
INPUT3
Setting channel select key for AQUOS LINK
compatible device via the HDMI input
AQUOS LINK control
LC-40LE700X.indb 52
LC-40LE700X.indb 52
6/26/09 4:26:12 PM
6/26/09 4:26:12 PM
Содержание Aquos LC-40LE700X
Страница 2: ...Cover_LC 40LE700X indd 2 Cover_LC 40LE700X indd 2 6 12 09 1 42 46 PM 6 12 09 1 42 46 PM ...
Страница 74: ...72 Memo LC 40LE700X_en_h indd 72 LC 40LE700X_en_h indd 72 6 26 09 4 36 25 PM 6 26 09 4 36 25 PM ...
Страница 75: ...LC 40LE700X_en_h indd 73 LC 40LE700X_en_h indd 73 6 26 09 4 36 26 PM 6 26 09 4 36 26 PM ...
