Use Sound Mode
Apart from manually adjusting sound settings, you
can use
Sound Mode
to set your TV to a predefined
sound setting.
1�
Press
MENU on the remote control and select
Sound.
2�
Press
OK or
≥
to enter
Sound and select
Sound Mode�
3�
Press
≤≥
to select one of the following
settings:
•
Personal
•
Music
•
Speech
4�
Follow the on-screen instructions to exit.
TV
The first time you set up your TV, you are prompted to
select an appropriate menu language and to perform
automatic installation of TV and digital radio channels
(If available).
This chapter provides instructions on how to reinstall
channels as well as other useful channel installation
features.
NOTE
• Re-installing channels modifies the channel list.
Select a digital audio language
1�
Press
MENU on the remote control and select
TV.
2�
Press
OK or
≥
to enter
TV menu.
3�
Press
<>
to select
1st Audio or 2nd Audio.
4�
Highlight your selection and press
≤≥
to select
an audio language.
5�
Follow the on-screen instructions to exit.
NOTE
• If your selected audio language is not broadcasted, the
default audio language will be displayed.
Automatically install channels
This section describes how to search and store
channels automatically. Instructions are for both digital
and analogue channels.
Step 1: Select your Tuner Mode
1�
Press
MENU on your remote control and select
TV
≥
Tuner Mode.
2�
Press
≤≥
to select
Antenna or Cable.
3�
Follow the on-screen instructions to exit.
TV menu
Step 2: Select your country
Select the country where you are located. The TV
installs and arranges channels according to your
country.
1�
Press
MENU on the remote control and select
TV
≥
Country.
2�
Press
≤≥
to select your country.
3�
Follow the on-screen instructions to exit.
Step 3: Automatic channel scan
Your TV searches and stores all available digital and
analogue TV channels as well as all available digital
radio channels.
1�
Press
MENU on the remote control and select
TV
≥
Channels�
NOTE
• You are prompted to enter current password to enter
Channels
if
Channel Block
/
Parental Guidance
/
Input Block
in the
Parental
menu is not the default
setting.
2�
Select
Channel Scan and press OK or
≥
and select
ATV only or ATV and DTV to start
channel installation. The installation may take a
few minutes.
3�
When complete, follow the on-screen
instructions to exit.
E
Update Scan
Update Scan
has similar function with
Channel Scan
.
The difference is you could update channel list without
erasing the original information.
NOTE
• This function is for Antenna mode only.
1�
Press
MENU on the remote control and select
TV
≥
Channels.
NOTE
• You are prompted to enter current password to enter
Channels
if
Channel Block
/
Parental Guidance
/
Input Block
in the
Parental
menu is not the default
setting.
2�
Press
<>
to select
Update Scan and press
OK or
≥
to start channel update.
3�
When complete, follow the on-screen
instructions to exit.
13
Содержание Aquos LC-32SH330E
Страница 33: ...32 ...