Sharp Aquos LC-32D53X, Руководство по эксплуатации

Страница: 18 / 68

1
1
16
ANALOG/DTV/RADIO buttons
Use the following buttons on the remote control to
operate the menu.
Watching TV
ANALOG: Press to switch to analogue mode. After
switching from DTV, radio or external input
mode to analogue mode, the TV jumps
to the most recently viewed analogue
channel.
DTV: Press to switch to DTV mode. After
switching from analogue, radio or external
input mode to DTV mode, the TV jumps to
the most recently viewed DTV channel.
RADIO: Press to switch to radio mode. After
switching from analogue, DTV or external
input mode to radio mode, the TV jumps to
the most recently tuned radio channel.
When you watch the TV for the fi rst time
When the TV powers on for the fi rst time after
purchase, perform the auto installation.
Analogue TV
You can run the auto installation to set channels
automatically.
To watch the analogue TV, select “Auto
Installation” from Setup menu. (See page 19.)
2
After setting the channels, you can select
a channel using
CH r / s or 0 – 9 on the
remote control unit. (See page 13.)
DTV
When the TV accesses to DTV mode for the fi rst time,
you need to run the auto search. To scan all available
services in your area, follow the procedures below.
To watch DTV broadcasts, select “Auto
Search” from installation menu. (See page 34.)
2
After setting the channels, you can select
a channel using
CH
r
/
s
or 0 – 9 on the
remote control unit. (See page 13.)
D53X_en_b.indd 16 D53X_en_b.indd 16 2007-7-31 11:20:51 2007-7-31 11:20:51