Sharp Aquos LC-22SV6U, Руководство по обслуживанию, Страница: 18 / 118

18
LC-22SV6U
(6) 480P signal white balance adjustment
a) Using a 480P signal generator, feed the following pattern signal through the COMPONENT terminal.
Then set the screen mode to STRECH. (This automatic adjustment works only in the STRECH screen
mode.)
b) Look at the category "AD9883" on the adjustment process menu. Modify the "R/G/B GAIN" and "R/G/B
OFFSET" settings as follows.
"R/G/B GAIN" from 240 to 140
"R/G/B OFFSET" from 55, 65 and 55 to 70, 50 and 70, respectively
c) Modify the "R/G/B GTAR" settings as follows.
"R/G/B GTAR" from D9, BD and D7 to D8, BC and D6, respectively
d) Still on the category "AD9883" adjustment process menu screen, make automatic adjustment with "AUTO
GAIN OFFSET".
e) Finally adjust the "R OFFSET" setting to -1.
*1 Make this adjustment after 30 minutes of aging.
*2 "AUTO GAIN OFFSET": Automatic adjustment is going on with "RUN" appearing. It ends when "OFF"
appears instead.
*3 These parameters can be controlled through the I
2
C external bus.
Fig. G White balance ajustment pattern (480P COMPONENT signal)
W
100%
G Y C M R Blue Black
100% modulation color bar signal
(AD9883A):1
AD DATA
000000
AD DATA WAIT
AUTO GAIN OFFSET OFF
R GAIN 140
G GAIN 140
B GAIN 140
R OFFSET 70
G OFFSET 50
B OFFSET 70
RGTAR GGTAR BGTAR D8 BC D6
RGCAL GGCAL BGCAL 00 00 00
ROCAL GOCAL BOCAL 80 00 80
Fig. H Page 1 of Adjustment process menu "AD9883A"