16
■
Charging the Battery (Continued)
Charging while Viewing:
You can watch the TV while charging is in progress by setting the “Battery charge” to “on” (page 29). In this case,
charging takes about 12 hours.
Note:
Note:
• Charging time may be longer depending on ambient temperature, battery condition and other factors. Check to make sure the charge
indicator is not lit before using.
General Reference for Battery Viewing Time
The viewing time differs according to the “Brightness”
setting (page 28).
Note:
Note:
• Operating time may be shorter depending on certain conditions such as use
in cold climates.
When You Want to Check the Amount of Remaining Battery
Power
Press the
Cyan
button on the remote control.
• Although the remaining battery power indicator will flash red for
the first 10 seconds, it will remain lit constantly after that time.
• The amount of remaining charge is only displayed when
operating on battery power.
• The remaining battery power indicator changes according to
battery status, temperature and conditions of use. This indicator
should be used as a reference for the amount of battery power
remaining.
When Battery is not Charging Properly
• If the charge indicator begins to flash extremely rapidly during charging, this means that charging is not proceeding
normally.
• When the charge indicator flashes at an interval of about a second during charging, the TV main unit is not in an
appropriate temperature range for charging. The temperature range for charging should be approximately between 10°C
(50°F) and 30°C (86°F).
• If the charge indicator begins to flash extremely rapidly (at about 3 flashes a second) during charging, this means that
charging is not proceeding normally because the battery may malfunction. Replace the battery with the new one.
Power (Continued)
Brightness Setting
bright
medium
dark
Viewing Time
about 1.5 hours
about 2 hours
about 3 hours
The remaining battery power indicator
changes as shown below when the battery
level becomes low.
(Green)
(Green)
(Red)
The remaining battery power indicator is
displayed constantly regardless of whether
the on-screen display is on or off when the
battery level is low.
Remaining
battery
power
indicator
Viewing with a Home AC Wall Outlet
Plug the AC adapter of the Wireless Centre and AC adapter of the TV main unit into an AC wall outlet.
• Check to make sure that the proper voltages indicated on the products are being used when plugging the AC adapters into
their respective DC terminals.
• If there is a Sharp product close to the video controller, the product may malfunction during transmission of the video controller.
■
Using the AC Adapter
• Although the AC adapters may become warm during use, this is not a malfunction.
• Do not wrap or cover the AC adapters with a blanket or similar covering. This can cause a malfunction or accident.
• Do not attempt to disassemble or modify the AC adapters. The insides of the AC adapter contain high-voltage components
that can result in the risk of electrical shock.
* Product shape varies in some countries.
AC wall
outlet
AC adapter
AC cord*
TV main unit
AC wall
outlet
AC adapter
AC cord*
IR
MOUSE
POWER
INPUT
DC12V
FACTORY
SETTING
Wireless
Centre