Sharp Aquos LC-13E1M, Руководство по обслуживанию, Страница: 18 / 108

18
LC-13E1H/M
LC-15E1H/M
[7] PUBLIC MODE
• How to enter into PUBLIC MODE
1. Turn off TV by pressing MAIN POWER switch.
2. While pressing VOL(+) key and CH(
ù
) buttons at the same time, press MAIN POWER switch.
For more than 2 seconds.
TV will turn on, and you will see the screen display a setting of PUBLIC MODE.
• Setting screen of "PUBLIC MODE"
Factory setting
PUBLIC MODE
MAXIMUM VOLUME [ 60]
VOLUME FIXED [VARIABLE]
REMOTE CONTROL [RESPOND]
USER CONTROL [RESPOND]
ON SCREEN DISPLAY [YES ]
AV1 INPUT [NORMAL ]
RESET
ENTER
1
↔
2 ···
↔
59
↔
60
VARIABLE
↔
FIXED
RESPOND
↔
LIMITED
RESPOND
↔
NO RESPOND
YES
↔
NO
NORMAL
↔
START
↔
AV1 FIXED
Adjust setting
1. You can select each item of functions by pressing cursor UP/DOWN buttons on the remote control or CH(
ù
)/
(
Ù
) buttons on the LCD TV. The letter of selected item turns to yellow colour when you selected it.
2. The setting position of each item of functions are made by pressing MENU cursor RIGHT/LEFT buttons on
the remote control or VOL(+)/(–) buttons on the LCD TV.
3. Select ENTER position after you set all functions, and press MENU cursor RIGHT/LEFT buttons on the
remote control or VOL(+)/(–) buttons on the LCD TV for confirmation.
Unless otherwise you make ENTER confirmation, the settings will not be memorized.
6-functions of Public Mode settings expand for public application.
1. MAXIMUM VOLUME(1--------60)
You can set the maximum volume at your desire level.
2. VOLUME FIXED (VARIABLE/FIXED)
You can fix the sound volume at your desire level.
When you set to "FIXED", the sound volume which you just set is fixed.
3. REMOTE CONTROL (RESPOND/LIMITED)
If you set "LIMITED", remote control button of POWER, CH(
ù
)/(
Ù
), VOL(–)/(+) and BRIGHT are responded,
but other buttons are not responded.
This is a position that you can not make MENU adjustments.
4. USER CONTROL (RESPOND/NO RESPOND)
"NO RESPOND" means that the TV does not respond when you press a user control buttons except POWER
button on the main unit.
5. ON SCREEN DISPLAY (YES/NO)
If you set "NO" position, OSD will not appear.
6. AV1 INPUT (NORMAL/START/AV1 FIXED)
Some application use DVD or VCR connecting to AV1 input of our monitor and you will not want to change it to
other mode, such as Component or AV2 input.
You can set the position of input "AV1 FIXED".
For other application that you want to start AV1 every time when you press POWER button, and you may select
other input mode after then, set it at "START" position.
7. RESET
You can cancel all Public Mode settings. (It returns to the factory setting.)
8. ENTER
You make sure after you have specified all functions, then press the enter key. Unless otherwise you press the
enter key, all positions that you have selected will not be set.