E-40
AN-PR1000_EN.fm
06/3/14
AN-PR1000H
TINSEA127AWZZ
2
3
4
5
6
7
8
1
ENGLISH
References
Maintenance
Cleaning the cabinet
Specifications
Main unit
Subwoofer
Remote control
Periodically wipe the cabinet with a soft cloth.
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the
cabinet finish.
Do not apply oil to the inside of each component. It may cause malfunctions.
As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The per-
formance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Amplifier section
Power source
AC 220 V - 240 V, 50 Hz
Power consumption
Power on: 80 W
Power stand-by: 0.6 W
Amplification system
Front speaker: Pulse width modulation
Subwoofer:
Pulse width modulation
Frequency range
FM : 87.5 - 108 MHz
Output power
Front speaker: RMS: 150W (75W + 75W) (DIN 45 324)
Subwoofer:
RMS: 150W (75W + 75W) (DIN 45 324)
Audio input terminals
Optical digital input (DIGITAL 1/2): Square type 2
Coaxial digital input (DIGITAL 3): RCA type 1
Analog input (LINE 1): RCA type 1 pair (L/R)
Analog input (LINE 2): RCA type 1 pair (L/R)
Analog input (LINE 3): RCA type 1 pair (L/R)
Audio output terminal
Subwoofer Pre Out: 10 kohms
Front speaker section
Type
2-way type speaker system (Magnetic shield)
5 cm (2") Tweeter 1
10 cm (4") Woofer 1
Impedance
4 ohms
General
Dimensions
Width: 1230 mm (48-7/16")
Height: 476 mm (18-3/4")
Depth: 397 mm (15-5-/8")
Weight
46.5 kg (102.3 lbs.)
Glass on top of unit
The maximum load/weight: 100 kg
Type
Bass reflex system
16 cm (6-1/2") Woofer 1
Maximum input power
150 W
Impedance
4 ohms
Power source
DC 3V ["AAA" size (UM-4, R03, HP-16 or similar) battery
2]