Sharp AH-XP10 B Series, Руководство по эксплуатации

Страница: 7 / 32

EN-6
ENGLISH
EN-6
OPERATION CONDITION
1
Press the MODE button to select the op-
eration mode.
2
Press the ON/OFF button to start opera-
tion.
• The green OPERATION lamp ( ) will light up.
TO TURN OFF
Press the ON/OFF button again.
• The green OPERATION lamp ( ) will turn off.
3
Press the THERMOSTAT button to set the
desired temperature, you can set temper-
ature in 0.5
°
C increments.
(AUTO/DRY mode)
The temperature can be
changed up to ±2.0°C from
the automatic setting.
(COOL mode)
The temperature setting
range: 14.0-30.0°C.
4
Press the FAN button to set the desired
fan speed.
In FAN mode, fan speed cannot be set to AUTO.
BASIC OPERATION
NOTE:
AUTO MODE
In the AUTO mode, the temperature setting and
mode are automatically selected according to the
room temperature when the unit is turned on.
DRY MODE
The fan speed is preset to AUTO and cannot be changed.
WHEN POWER FAILURE OCCURS
This air conditioner has a memory function to store
setting when a power failure occurs.
After power recovery, the unit will automatically re-
start in the same settings which were active before
the power failure, except for TIMER, POWERFUL
JET / SUPER JET, BEST SLEEP, BABY MODE, ECO
MODE, SELF CLEAN settings.
Mode
Indoor
Temp.
Outdoor
Temp.
Cooling
Upper limit 32°C 43°C
Lower limit 21°C 21°C
• The build-in safety device may prevent
the unit from operating when used out of
this range.
• Condensation may form on the air outlet
if the unit operates continuously in the
COOL or DRY mode when humidity is
over 80%.
AUTO BREEZE QUIET SOFT LOW HIGH
BREEZE QUIET SOFT LOW HIGH
FAN AUTO COOL DRY
1
4
3
2