background image

EN-1

ENGLISH

Please read this manual carefully before using 

the product. This manual should be kept in a 

safe place for handy reference.

ENGLISH

CONTENTS

  IMPORTANT SAFETY INSTRUCTIONS .....EN-1

  PART NAMES ..............................................EN-2

  USING THE REMOTE CONTROL ..............EN-4

  AUXILIARY MODE ......................................EN-4

  TIPS ON SAVING ENERGY ........................EN-4

  BASIC OPERATION ....................................EN-5

  ADJUSTING THE AIR FLOW DIRECTION ........EN-6

  SUPER JET OPERATION 

...................EN-6

  GENTLE COOL AIR ....................................EN-7

  PLASMACLUSTER OPERATION ...............EN-7

  LAUNDRY OPERATION ..............................EN-8

  TIMER OPERATION....................................EN-9

  INSTANT LOW WATTAGE OPERATION ....EN-10

  SELF CLEAN OPERATION .........................EN-10

  MAINTENANCE ..........................................EN-11

  BEFORE CALLING FOR SERVICE ............EN-12

  OPERATING CONDITION...........................EN-12

IMPORTANT SAFETY           

INSTRUCTIONS 

WARNINGS

 Do not pull or deform the power supply cord. 

Pulling and misuse of the power supply cord 

can result in damage to the unit and cause 

electrical shock.

 Be careful not to expose your body directly to 

the outlet air for a long time. It may affect your 

physical conditions. 

 When using the air conditioner for infants, 

children, elderly, bedridden, or disabled people 

make sure the room temperature is suitable for 

those in the room.

 Never insert objects into the unit. Inserting 

objects can result in injury due to the high 

speed rotation of internal fans.

 Ground the air conditioner without fail. Do not 

connect the grounding wire to gas pipe, water 

pipe, lightning rod or telephone grounding 

wire. Incomplete grounding may cause electric 

shock.

 If anything is abnormal with the air conditioner 

(ex. a burning smell), stop the operation 

immediately and turn the circuit breaker OFF. 

 The appliance shall be installed in accordance 

with national wiring regulations.

 

Improper 

cable connection can cause the power supply 

cord, plug and the electrical outlet to overheat 

and cause fire.

 If the supply cord is damaged, it must be 

replaced by the manufacturer or its service 

agent or a similarly qualified person in order 

to avoid a hazard. Use only the manufacture-

specified power cord for replacement. 

 Do not splash or pour water directly on the 

unit. Water can cause electrical shock or 

equipment damage.

 Do not attempt to install/remove/repair the unit 

by yourself. Incorrect work will cause electric 

shock, water leak, fire etc. Consult your dealer 

or other qualified service personnel for the 

installation/removal/repair of the unit.

CAUTIONS

 Open a window or door periodically to 

ventilate the room, especially when using gas 

appliances. Insufficient ventilation may cause 

oxygen shortage.

 Do not operate the buttons with wet hand. It 

may cause electric shock.

 For safety, turn the circuit breaker off when not 

using the unit for an extended period of time.

 Check the outdoor unit mounting rack 

periodically for wear and to make sure it is 

firmly in place.

 Do not put anything on the outdoor unit nor 

step on it. The object or the person may fall 

down or drop, causing injury.

 This unit is designed for residential use. Do 

not use for other applications such as in a 

kennel or greenhouse to raise animals or grow 

plants. 

 Do not place a vessel with water on the unit. 

If water penetrates into the unit, electrical 

insulations may deteriorate and cause electric 

shock.

 Do not block the air inlets nor outlets of the 

unit. It may cause insufficient performance or 

troubles. 

 Be sure to stop the operation and turn the 

circuit breaker off before performing any 

maintenance or cleaning. A fan is rotating 

inside the unit and you may get injured.

 This appliance is not intended for use by 

young children or infirm persons without 

supervision. Young children should be 

supervised to ensure that they do not play with 

the appliance.

 Make sure to connect the air conditioner to 

power supply of the rated voltage and fre-

quency. Use of a power supply with improper 

voltage and frequency can result in equipment 

damage and possible 

re.

 Do not install the unit in a place where in

am-

mable gas may leak. It may cause 

re.

  Install the unit in a place with minimal dust, 

fumes and moisture in the air.  

 Arrange the drain hose to ensure smooth 

drainage. Insuf

fici

ent drainage may cause wet-

ting of the room, furniture etc.

 Make sure a leak breaker or a circuit breaker 

is installed, depending on the installation loca-

tion, to avoid electrical shock.

AH-PNX11_EN.indd   1

11.3.17   4:02:12 PM

........

Содержание AH-PNX11

















Отзывы: