Sharp 703SH, Руководство пользователя

Страница: 25 / 137

24 Voice Call/Video Call Functions
Redialling
You can redial numbers in the call log. Select from specific categories
or “All Calls”. Specific categories contain up to 10 numbers and the
“All Calls” list contains up to 30.
1.
Press
D
in standby.
2.
Select the category from “All Calls”, “Dialled Numbers”,
“Missed Calls” or “Received Calls”.
To switch logs, press
c
or
d
.
3.
Highlight the phone number you wish to call.
4.
Press
D
to redial the call.
Answering a Voice Call
When an incoming call is detected, the phone rings.
1.
Press
D
or [Answer] to answer the call.
Or press any key except
F
, ,
U
and [Busy] when the “Any
Key Answer” function is enabled. Set the Any Key Answer
function in the profile of each mode (p. 95).
Tip
• If you have subscribed to the Calling Line Identification (CLI) service
and the caller’s network sends the number, the caller’s number is
displayed on the screen. If the caller’s name and number are saved
in the Contacts List, the caller’s name and phone number are
displayed on the screen.
• If the number is a restricted number, the display shows “Withheld”.
• When you receive a call from the person whose picture is
registered in the Contacts List, the picture, name and phone
number are displayed.
Rejecting an Incoming Call
1.
Press
F
while the phone is ringing to reject a call you do not
wish to answer.
Letting the Caller Know You are Unavailable
1.
Press [Busy] while the phone is ringing to send a busy tone to
the caller.
Incall Menu (Voice Call)
Your phone has additional functions available while a call is in
progress.
Adjusting the Earpiece Volume
You can adjust the earpiece volume (and handsfree volume, if
connected) from five levels.
1.
Press
V
or
W
to display the Earpiece Volume screen.
2.
Press
V
(or
a
/
d
) to increase the volume of the call or press
W
(or
b
/
c
) to decrease the volume.
3.
Press when the volume is set to the desired level.