![SharkRF openSPOT Скачать руководство пользователя страница 64](http://html1.mh-extra.com/html/sharkrf/openspot/openspot_user-manual_1253378064.webp)
DMR transceiver
63
The
traffic graph
can be shown by clicking on the arrow at the top of the Traffic
section. Values displayed are rough estimates, and are based on the currently
active connector's traffic.
The openSPOT4 uses very little internet traffic. Depending on the active
connector, the data rate estimates are as follows:
Quiet channel is 36-180 kB / hour
Active channel is 3-6 MB / hour
Network settings
The web interface of the openSPOT4 is not password protected by default,
which means anyone on the local network can open it. You can set a password
by entering it in the
Change web int. password
input field. To reset the original
behavior and clear the password, click on the
Clear password
button.
The
Hostname
is used by openSPOT4's built-in LLMNR and MDNS server which
means you'll be able to open the web interface by entering
or
into the browser. The hostname is also displayed at the
top right corner of the web interface. If you have
multiple openSPOT4s on the
same network
, make sure you use different hostnames for each of them.
The following settings are only available if
Advanced mode is enabled.
Содержание openSPOT
