LED Control
With the lighting off, press the button on the controller twice in quick succession to
activate the illumination. The preset mode is "Permanent" (see Lighting Modes below),
while green is set as the default color. Press the controller button once to change the
color. The color sequence is as follows: green, red, blue, yellow, light blue, purple and
then white. Press and hold the controller button to dim the illumination. Press the
controller button twice in quick succession to switch to the next lighting mode.
This mode causes the currently selected color to pulsate. Press the controller button
once to change the color in the sequence mentioned above. Press the button twice in
quick succession to switch to the next lighting mode.
In the third adjustable lighting mode, the colors change automatically and continuously.
Press the controller button once to stop the color change and keep the currently display-
ed color. Press the button again to restart the color change. Press and hold the button to
dim the illumination. To turn off the illumination, press the controller button twice in quick
succession.
Lighting Modes
Off
Permanent
Pulsating
Color Change
Press Once
N/A
Next Color
Next Color
Stop Color
Change
Press and Hold
N/A
Dim
Illumination
N/A
Dim
Illumination
Press Twice
Illumination On
Next Mode
Next Mode
Illumination Off
