Shark SC660NZ, Руководство пользователя

Страница: 4 / 20

Quick Start
ASSEMBLY
1 Safely remove contents of the portable
steam cleaner cleaning system and lay
them out on a flat surface to see that you
have all the components to complete the
assembly. (Refer to page 2.)
FILL
2 Turn the water tank cap anti clockwise
and remove to fill, using the filling flask
provided. Be careful not to overfill. Replace
the cap by turning clockwise. The water
tank does not have to be completely full for
the steam bottle to generate steam. Steam
will stop when the water tank is empty.
You can refill at any time.
Your
Shark
® portable steam cleaner is designed to clean surfaces that will withstand high heat
and moisture. Do not use on unsealed wood surfaces (especially wooden antique furniture),
unglazed ceramic tile, painted surfaces or surfaces that have been treated with wax, oils, varnishes,
or shellac. The sheen may be removed by the heat, steam, and friction of the cleaning tools. Lacquer
and polyurethane coatings provide a hard durable protective finish that withstands moisture but it
is always recommended to test an isolated area of the surface to be cleaned before proceeding. We
also recommend you check the use and care instructions from the surface manufacturer.
When cleaning finished wood surfaces, use broad, continuous cleaning strokes. To prevent surface
damage, avoid focusing steam or allowing the cleaning tools to sit in one spot for any amount of
time.
When assembling your portable
steam cleaner
, there may be a little water in the water tank. This
is because we test all our portable steam cleaning systems 100% before you buy them, so you get
a quality Shark
®
steam product.
2
3
DIRECT SPRAY STEAM BOTTLE USE
3 Attach the concentrator nozzle by
pressing the lock release buttons on the
concentrator nozzle and slide onto the
Steam Bottle nozzle. Press in and turn
clockwise until the concentrator nozzle
clicks into place.