Shark Rocket NV480UKP, Руководство пользователя

Страница: 3 / 9

4 5
ASSEMBLY FLOOR
CLEANING
1 Place the vacuum body onto Power nozzle.
2 Insert extension wand into top of the vacuum.
3 Insert handle into the top of the extension wand (if not already assembled).
4 Insert hose into hose connector.
5 Insert the crevice tool and dusting brush onto the accessory holder as shown.
6
The accessory holder is removable. To remove, first remove the dust cup (as explained on page 9), then hold and pull the tab to the left
and pull out. To replace, align the pins into the hinge on the vacuum and clip back into place.
1 Press POWER to clean bare floor surfaces, area rugs or areas above-floors. The brushroll will not spin in this mode.
2 Press POWER and BRUSHROLL to clean carpets. The brushroll indicator lights will illuminate GREEN. If there is a jam, the indicator light
on Power nozzle will illuminate RED. Refer to MAINTENANCE (P10) for instructions on removing blockages.
3 Place your foot gently on the Power nozzle and tilt the handle back to start cleaning.
Note: The brushroll will only spin once the vacuum is reclined back.
CLICK
1
5
3
1 2
3
OR
POWER
Bare floor or wand cleaning
POWER + BRUSHROLL
Carpet cleaning
CLICK
2 4
CLICK
CLICK
6