
Doc
#
E166703
10-19
10: Using the Optional Display
Electro
Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Electro
Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
10.6.1: RS485 Communication Configuration
RS485 serial communication is set up between the MP200 unit’s Com 3 and the
MDSN/MDLN’s RS485 port.
NOTE:
See 5.1.2: RS485 Communication, on page 5-2, for general information con-
cerning RS485 communication.
Follow this procedure:
1. For the MP200 unit:
a. From the MP200 unit’s Device Profile (see Chapter 5), open the Communi-
cations screen.
b. Make sure the Com3 settings are the same as those shown in the screen
below. If they are not, click the Default for Display button to bring these
settings into the Com 3 fields.
c. If you have changed the Com 3 settings to make them match those shown
above, click Update Device to send the new settings to the meter. If you
did not need to make any changes, click Exit to close the Device Profile
screen.
Содержание MP200
Страница 1: ...V 1 07 November 5 2018 ...
Страница 2: ...This page intentionally left blank ...