21
4.6.4 Camera Information
Before the camera disconnection, it will save the lens distortion correction and default
offset compensation parameter settings to the GPS drive on the camera.
This information is important for the pre-processing of photo data, which can be
viewed in the SHARE Data Manager and can be alerted in case of unexpected data loss.
Don't worry if you accidentally delete the camera info, we have saved an online
backup for you, which can be downloaded to the camera using the SHARE Data Manager.
5.Camera Maintenance
When using the oblique camera, please pay attention to the daily maintenance.
(1) Avoid storing the camera in a place of extreme hot, strong vibration, strong
magnetic and high humidity.
(2) Please do not use detergent containing diluent or gasoline and other organic
solvents to clean UV Lens.
(3) When storing the camera, avoid long-term exposure of light to the lens.
(4) Avoid bringing the equipment directly from cold places to warm places, to prevent
moisture condensation.
(5) The working temperature of the equipment is about - 10 ~ 50
℃
. It is not
recommended to work in extremely cold and hot environment beyond the working
temperature range.
(6)
Pay attention to the cleaning and drying of DJI SkyPort connector and put on the
protective when not attached to the craft.
(7) Camera shutter is consumable item, under normal circumstances, the effective
number of shutter is about 200,000 times; 200~250 thousand will occur shutter fatigue,
there is a risk of photo loss; Above 250 thousand, the camera has a high probability of
losing the photo, not taking photos, slow reaction, camera error and other phenomena.
After the number of camera shutters reaches 200k, it is recommended to return the
camera to the factory for a paid replacement of the shutter, to avoid the impact of
equipment failure on flight operation