Packaging contents
1x LED Mood lamp
1x Manual
1x Remote
General safety instructions
Please read the operating instructions for the
LED Mood lamp before use. The operating
instructions are part of the product. They contain
important notes on start-up and handling of the
device. Always keep the enclosed operating inst-
ructions so as to be able to look up information.
They must be enclosed when passing the device
on to third parties.
Safety precautions
The user must observe the safety notes and
warnings in order to maintain this status
and to ensure safe operation. Please read the
operating instructions before start up.
Never attempt to open the device, the LED
Mood lamp cannot be repaired; this part must
be immediately disposed in case of a defect.
Any other use of the device than described
can damage the product or endanger the user
due to e. g. short-circuits, fire or an electric
shock. The entire product may not be modified
or adapted.
These safety notes must be observed in all ca-
ses! Any warranty claim is void in the case of
damages caused by non-observance of these
operating instructions. We are not liable for
consequential damages or for damages to
property or persons caused by non-observan-
ce of the safety notes and improper operation
of the device.
Safety notes
Safe operation is not possible anymore, if:
•
the LED Mood lamp has visible damages,
•
the LED Mood lamp does not work
anymore
•
Please ensure a safe and firm surface for
the LED Mood lamp to stand on.
•
Please ensure that the cable is not getting
squashed or otherwise damaged.
401713 manual from maker.pdf 1 19-5-2017 16:43:28
Where to place the lamp and where not
WEEE NL: 3505
WEEE DE: 37281017
WEEE AT: 40133
Imported by
Kanaal Noord 350
NL-7323 AM Apeldoorn
www.shada.nl
MV#:20180312
GB
Operating Manual
Safety Class II
401713
5
230V / 50 Hz
>0,42
250
50
RGB + ~3.000K
RGB + True warm white
25.000
20.000x
180°
<0,5s
Ø200 x H 195
Ra>80
RGB: A | Warm white: A++
5050 SMD
5050 SMD
IP20
Yes, via remote control
1,5m, H03VVH2-F
Euro
-20°C ≤T ≤40°C
ABS + Ground glass
Specifications
Art Nr.
power (W):
Input voltage (V AC):
power factor
Luminous flux (lm):
Lumen/W
Color temperature (K):
Color description
Lifespan(h):
Switching cycles (on/off):
Beam angle:
Warm up-time (95%):
Dimensions (mm):
Colour rendering index (CRI):
Energy class:
LED type RGB:
LED type Warm white:
Protection class IP:
Dimmable
Cable type:
Plug type
Working temperature (T °C):
Housing:
GB
Notes on Disposal
The product is designated for separate collection at an appropriate collection point. Do not
dispose of the product with household waste. For more information, contact the retailer or
the local authority responsible for waste management.
Care
Before cleaning the unit, disconnect it, if necessary form other components; do not use aggressive
cleaning agents.
Warranty
The unit has been carefully checked for defects. If nevertheless you do have cause for complaint, please
go back to the retailer where you have bought the product together with your proof of purchase.
Safety
General advices
●
Read the manual carefully before use. Keep this manual for future reference.
●
Only use the product for its intended purposes. Do not use the product for other purposes than
described in the manual.
●
Do not use this product if any part is damaged or defective. If the product is damaged or defective,
replace the product immediately.
●
This product Must not be used in the immediate viciity of children without the supervision of an
adult. Children must not be allowed to play with the device.
●
Do not modify the product in any way.
○
Do not expose the product to water or moisture. (IP 20)
○
Do not immerge the product into water. (IP 44 – IP 66)
●
Keep the product away from heat sources.
●
Do not block the ventilation openings.
●
Do not look directly into the light source of theLED lamp.
●
Keep a minimum distance of >2 meter between the lamp and the surface being illuminated.
Electrical safety
●
To reduce risk of electric shock, this product should only be opened by an authorized technician
when service is required.
●
Do not use the product if the cable or plug is damaged or defective. When damaged or defective, it
must be replaced by the manufacturer or an authorised repair agent.
●
Before use, always make sure that the voltage is the same as the voltage on the rating plate of
the device.
●
Make sure that the cable does not hang over the edge of a worktop and cannot be caught acci-
dentally or tripped over
Warning
●
The light source contained in this luminaire shall only be replaced by the manufacturer or his service
agent or a similar qualified person.
●
Caution, risk of electric shock.
●
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the
luminaire has to be destroyed.
Disclaimer
We reserve the right to make technical modifications. without notice. All logos, brands and product
names are trademarks or registered trademarks or their respective holders and are hereby recognized
as such.
We are not liable for damage arising from incorrect handling, improper use or wear or tear.
Please visit us online
For more information about our company and our products,
Documentation
The product has been manufactured and supplied in compliance with all relevant regulations and
directives, valid for all member states of the European Union. The product complies with all applicable
specifications and regulations in the country of sales.
Formal documentation is available upon request.
The formal documentation includes, but is not limited
to the Declaration of Conformity, the Material Safety Data Sheet and the product test report.
CE declaration
This product complies with the following directives:
LVD: 2014/35/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
The complete Declaration of Conformity
Document (DOC) can be found here:
