SGMW Baojun 530, Сервисное и эксплуатационное руководство пользователя

Страница: 115 / 215

Temperature Control System 107
7
T
em
pe
ra
ture C
on
tr
o
l S
y
s
tem
Note
After the air conditioning system is turned on, you can
find water drops in the lower area of the engine
compartment. The water drops are formed as moisture
in the air condenses on surface of the air conditioning
system component, which is a normal phenomenon.
Note
As the air conditioning compressor works, it
consumes certain engine power. This is the reason
why you may find that the vehicle power performance
decreases when the air conditioning refrigeration
function is activated.
Air Conditioning (A/C) Button
To turn on the air conditioning (A/C) system:
1. Start the engine.
2. Press the air conditioning (A/C) button. The button
indicator illuminates, indicating that the air
conditioning system is working.
3. Adjust the fan speed.
To turn off the air conditioning system:
Press the air conditioning (A/C) button again. The button
indicator goes out, indicating that the air conditioning
system has stopped refrigeration.
If the air conditioning system was kept on when the engine
was shut down the last time, the system will turn on
automatically as the vehicle is started next time.
Note
Note
The air conditioning system cannot work if the fan
control thumbwheel is turned to OFF position.
Cool Air
Fast Cooling
To cool down fast in scorching hot days or after the vehicle
is kept under the blazing sun for a long time:
1. Open the door windows a little to expel the hot air inside.
2. Turn on the air conditioning (A/C) system. (The indicator
illuminates at this time.)
3. Activate the internal circulation mode.
4. Switch the air distribution mode to face mode ( ).
5. Adjust the temperature to the maximum coolness.
6. Adjust the fan speed to the maximum.
Normal Cooling
1. Turn on the air conditioning (A/C) button. (The indicator
illuminates at this time.)
2. Activate the internal circulation mode.
3. Switch the air distribution mode to face mode ( ) or dual
mode ( ).
4. Adjust the temperature to the cool air area.
5. Adjust the fan speed to the desired value.
Warm Air
Rapid Heating
Activate the rapid heating mode to increase the passenger
area temperature quickly. It is prohibited to activate this
mode for a long time, otherwise the inside air quality will
decrease and fog can form on the windows. To clear up the
fog on the windows, turn off the internal circulation mode so
that fresh air enters inside.
To acquire the warmest air:
1. Turn off the air conditioning (A/C) system. (The indicator
goes out at this time.)
2. Activate the internal circulation mode.
3. Switch the air distribution mode to foot mode (
).
4. Adjust the temperature to the maximum warmness.
5. Adjust the fan speed to the maximum.